SICK MLP1 Safety Switch, Power Actuator Included, Aluminium, Power
- N° de stock RS:
- 285-4137
- Référence fabricant:
- MLP1-SMUF0AC
- Fabricant:
- SICK
Sous-total (1 unité)*
452,01 €
(TVA exclue)
546,93 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 01 janvier 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 452,01 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 285-4137
- Référence fabricant:
- MLP1-SMUF0AC
- Fabricant:
- SICK
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SICK | |
| Product Type | Safety Switch | |
| Lock Style | Power | |
| Lock Type | Power | |
| Actuator Included | Yes | |
| Housing Material | Aluminium | |
| Series | MLP1 | |
| Contact DC Voltage | 24V dc | |
| IP Rating | IP67 | |
| Minimum Operating Temperature | -20°C | |
| Switch Contact Current | 100mA | |
| Contact AC Voltage | 230V ac | |
| Maximum Operating Temperature | 55°C | |
| Hazardous Area Certification | No | |
| Depth | 120mm | |
| Standards/Approvals | IEC 60529 | |
| Length | 60mm | |
| Width | 38.5mm | |
| Sélectionner tout | ||
|---|---|---|
Marque SICK | ||
Product Type Safety Switch | ||
Lock Style Power | ||
Lock Type Power | ||
Actuator Included Yes | ||
Housing Material Aluminium | ||
Series MLP1 | ||
Contact DC Voltage 24V dc | ||
IP Rating IP67 | ||
Minimum Operating Temperature -20°C | ||
Switch Contact Current 100mA | ||
Contact AC Voltage 230V ac | ||
Maximum Operating Temperature 55°C | ||
Hazardous Area Certification No | ||
Depth 120mm | ||
Standards/Approvals IEC 60529 | ||
Length 60mm | ||
Width 38.5mm | ||
- Pays d'origine :
- MY
SICK MLP1 Series Safety Switch, IP67, 24V DC Supply Voltage - MLP1-SMUF0AC
This safety switch is a power-to-lock interlock designed for safeguarding access points in industrial automation. It employs RFID sensing and uniquely coded actuation to monitor guard position and permit controlled locking. The unit features self-monitoring semiconductor outputs for safety signalling and is intended for process protection where a fail-safe OFF state is required on fault. The device is suitable for series connection and diagnostic configurations using standard M12 cabling.
Features and Benefits:
• SIL 3 safety integrity delivering very low dangerous-failure probability
• Category 4 safety rated enabling high-level risk reduction
• Power-to-lock mechanism providing 350mA locking current draw
• Self-monitoring OSSD outputs supplying ≤100mA output current
• IP67 aluminium housing giving dust-tight and waterproof protection
• Category 4 safety rated enabling high-level risk reduction
• Power-to-lock mechanism providing 350mA locking current draw
• Self-monitoring OSSD outputs supplying ≤100mA output current
• IP67 aluminium housing giving dust-tight and waterproof protection
Applications
• Suitable for machine guard interlocking in manufacturing cells
• Ideal for cascading safety devices in series connections
• Used with safety evaluation units for access control systems
• Can be used for machine tending stations requiring coded access
• Ideal for cascading safety devices in series connections
• Used with safety evaluation units for access control systems
• Can be used for machine tending stations requiring coded access
What are the electrical supply requirements?
The sensor and magnet operate from 24V DC with specified operating ranges for individual and cascade connections.
How does the device behave if a fault occurs?
At least one safety-related semiconductor output is driven to the OFF state to ensure a safe condition.
What diagnostic and connection options exist?
It supports T-connector series wiring without diagnostics and Flexi Loop with diagnostics via an 8-pin M12 interface.
What environmental conditions can it withstand?
The unit operates between -20°C and +55°C and meets vibration and shock resistance standards.
Is the unit suitable for hazardous-area installations?
It is not certified for hazardous areas and should not be used where such certification is required.
Liens connexes
- SICK MLP1 Safety Switch Aluminium
- SICK MLP1 Safety Switch Aluminium, Electronic
- SICK MLP1 Safety Interlock Switch Valox
- SICK MLP1 Series Interlock Switch Power to Lock/Unlock Actuator Included
- SICK MLP1 Series Solenoid Interlock Switch, Power to Lock Actuator Included
- SICK MLP1 Series Non-Contact Safety Switch, Thermoplastic Housing
- SICK MLP1 Series End Connector
- SICK TR110 Safety Switch Fibreglass Reinforced Thermoplastic, TR110 Lock
