SICK i10 Safety Switch, Fibreglass Polyester
- N° de stock RS:
- 285-1814
- Numéro d'article Distrelec:
- 303-74-010
- Référence fabricant:
- i10-HB213
- Fabricant:
- SICK
Sous-total (1 unité)*
58,91 €
(TVA exclue)
71,28 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 unité(s) expédiée(s) à partir du 14 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 58,91 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 285-1814
- Numéro d'article Distrelec:
- 303-74-010
- Référence fabricant:
- i10-HB213
- Fabricant:
- SICK
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SICK | |
| Product Type | Safety Switch | |
| Actuator Included | No | |
| Safety Contacts | 1 NO, 2 NC | |
| Housing Material | Fibreglass Polyester | |
| Series | i10 | |
| Switch Contact Current | 3A | |
| IP Rating | IP67 | |
| Minimum Operating Temperature | -20°C | |
| Contact DC Voltage | 24V dc | |
| Contact AC Voltage | 240V ac | |
| Hazardous Area Certification | No | |
| Maximum Operating Temperature | 80°C | |
| Standards/Approvals | IEC 60529 | |
| Width | 30.4mm | |
| Length | 90.5mm | |
| Depth | 31mm | |
| Number of Head Directions | 2 | |
| Sélectionner tout | ||
|---|---|---|
Marque SICK | ||
Product Type Safety Switch | ||
Actuator Included No | ||
Safety Contacts 1 NO, 2 NC | ||
Housing Material Fibreglass Polyester | ||
Series i10 | ||
Switch Contact Current 3A | ||
IP Rating IP67 | ||
Minimum Operating Temperature -20°C | ||
Contact DC Voltage 24V dc | ||
Contact AC Voltage 240V ac | ||
Hazardous Area Certification No | ||
Maximum Operating Temperature 80°C | ||
Standards/Approvals IEC 60529 | ||
Width 30.4mm | ||
Length 90.5mm | ||
Depth 31mm | ||
Number of Head Directions 2 | ||
- Pays d'origine :
- DO
SICK i10 Series Safety Switch, IP67, Fibreglass Polyester Housing - i10-HB213
This safety switch is an electromechanical device designed to monitor guard positions in industrial settings. It provides clear switching behaviour using positive-action contacts and is intended for direct wiring into safety circuits where diagnostic logic is handled externally. The unit is built for use in harsh environments and rated for a wide ambient temperature range.
Features and Benefits:
• 3A contact current delivers compatible load switching capability
• 1NO 2NC contact arrangement enables Basic safety signalling
• IP67 enclosure rating permits washdown and dust‑tight installation
• Fibreglass polyester housing resists mechanical and chemical exposure
• -20 to 80°C operating range supports varied site temperatures
• 1NO 2NC contact arrangement enables Basic safety signalling
• IP67 enclosure rating permits washdown and dust‑tight installation
• Fibreglass polyester housing resists mechanical and chemical exposure
• -20 to 80°C operating range supports varied site temperatures
Applications
• Suitable for guarding doors on manufacturing machinery
• Ideal for conveyor access point monitoring
• Used with safety logic units for series safety circuits
• Can be used for equipment isolator interlocks
• Suitable for washdown environments in production areas
• Ideal for conveyor access point monitoring
• Used with safety logic units for series safety circuits
• Can be used for equipment isolator interlocks
• Suitable for washdown environments in production areas
What type of contact switching principle does it use?
It uses a slow‑action switching element with positive‑action N/C and N/O contacts.
How should short‑circuit protection be implemented?
Short‑circuit protection is specified as 3A gG and should be applied in the supply circuit.
How is diagnostics and fault detection handled?
The switch has no internal fault detection so the connected safety‑related logic unit performs fault monitoring.
What electrical ratings apply for AC and DC operation?
Rated operating current is 3A at 240V AC and 2A at 24V DC.
Liens connexes
- SICK i10 Safety Switch, Fibreglass Polyester
- SICK i10 Safety Interlock Switch, Fibreglass Reinforced Thermoplastic
- SICK i10 Safety Switch Fibreglass Reinforced Thermoplastic
- SICK i10 Safety Interlock Switch Fibreglass Reinforced Thermoplastic, Electromagnetic
- SICK i10 Safety Interlock Switch Fibreglass Reinforced Thermoplastic, Electromagnetic
- SICK i10 Safety Switch Fibreglass Reinforced Thermoplastic, Power to Release
- SICK TR4 Safety Interlock Switch Fibreglass Polyester, Electronic
- SICK I12 Safety Interlock Switch, Fibreglass Reinforced Thermoplastic