SICK i10 Safety Switch, Fibreglass Polyester

This safety switch is an electro-mechanical interlock designed for industrial machinery where environmental protection and straightforward contact signalling are required. It provides slow-action switching with one normally closed and one normally open contact, intended for direct wiring into safety logic. The unit is rated for use across a wide ambient temperature range and is supplied without an actuator, allowing users to select the appropriate actuator style for their application.

• IP67 enclosure provides ingress protection for wet environments
• 5mA switching current supports low-current control circuits
• Rated for 240V AC and 24V DC operation for flexible use
• Operates between -20°C and +80°C for high-temperature tasks
• Fibreglass polyester housing resists industrial wear and chemicals

• Suitable for safety interlock on washdown production lines
• Ideal for machinery with low-voltage control systems
• Used with safety logic units for monitored door protection
• Can be used for outdoor equipment requiring waterproofing
• Suitable for rotations requiring two-direction head actuation

It includes one normally closed contact and one normally open contact.

The switch has no internal fault detection and relies on the connected safety-related logic unit for diagnostics.

The switching element is slow-action with a rated operating current of 3A at 240V AC and 2A at 24V DC and requires 3A gG short-circuit protection.

Connection is via a single cable gland sized for M16 fittings.

Mechanical life is specified at 1,000,000 switching cycles with an actuation frequency of up to 3,600 per hour.