Honeywell Technologies CPS Rope Pull Switch 172.72 mm, Straight, 2 NO/2 NC

N° de stock RS:: 820-3323
Référence fabricant:: 1CPSA2
Fabricant:: Honeywell

Honeywell Technologies CPS Rope Pull Switch 172.72 mm, Straight, 2 NO/2 NC

Sous-total (1 unité)*

731,97 €

(TVA exclue)

885,68 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	731,97 €

*Prix donné à titre indicatif

N° de stock RS:: 820-3323
Référence fabricant:: 1CPSA2
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Rope Pull Switch
	Contact Configuration	2 NO/2 NC
	Mounting Orientation	Straight
	Indicator Type	LED
	IP Rating	IP67
	Number of Cable Entries	3
	Series	CPS
	E-Stop Button	Yes
	Contact Current	10A
	Contact DC Voltage	250V dc
	Contact AC Voltage	600V ac
	Reset Button	Yes
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	80°C
	Standards/Approvals	CSA, ISO, CE, EN, SIL, UL
	Width	99.06mm
	Housing Material	Die Cast Zinc
	Length	172.72mm
	Depth	62.2mm
	Hazardous Area Certification	No
	Conduit Entry	1/2 in NPT
	Mechanical Life	1000000Operations

	Sélectionner tout
	Marque Honeywell
	Product Type Rope Pull Switch
	Contact Configuration 2 NO/2 NC
	Mounting Orientation Straight
	Indicator Type LED
	IP Rating IP67
	Number of Cable Entries 3
	Series CPS
	E-Stop Button Yes
	Contact Current 10A
	Contact DC Voltage 250V dc
	Contact AC Voltage 600V ac
	Reset Button Yes
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 80°C
	Standards/Approvals CSA, ISO, CE, EN, SIL, UL
	Width 99.06mm
	Housing Material Die Cast Zinc
	Length 172.72mm
	Depth 62.2mm
	Hazardous Area Certification No
	Conduit Entry 1/2 in NPT
	Mechanical Life 1000000Operations

Honeywell Straight Cable Switch, 2NO/2NC, 76 m - 1CPS Series -1CPSA2

This Honeywell cable switch provides VITAL emergency-stop protection on exposed conveyors and assembly lines. It's designed to handle cable runs of up to 76 metres and is a more efficient alternative to using multiple emergency-stop push buttons. The double-latched internal mechanism (push and pull) prevents cables from slacking or breaking over time. For ease of installation, a midpoint cable tension window indicates the correct cable tension. Once the contacts have been switched, you'll need to reset the cable to the correct tension by manually rotating a knob.

Features and Benefits

• Enhances productivity by eliminating nuisance stops

• Operates in a wide temperature range of -25°C to +80°C

• Ingress protection rating of IP67 for full dust protection and strong water resistance

• Compatible with high voltage systems up to 600 V AC or 250 V DC

• Auxiliary contacts provide closed circuit conditions for monitoring

Applications

• Assembly lines

• Conveyor systems

• Packaging equipment

What local variables can this cable switch handle?

This cable switch is Ideal for use in warehouses or distribution centres, where operating systems can experience high vibration or large temperature swings. The straight-mounted device is also suited to conveyor systems where easy through-wiring or highly visible trip status is required.

Honeywell 1CPS Cable Pull Safety Switches

The 1CPS cable pull safety switch series is intended for applications such as conveyor runs within a defined system zone with a cable run of up to 76 meters. This means they are more cost effective than using a comparable multiple emergency stop push button system.

The internal mechanism is latched by both a push and pull action. This provides extra protection should the cable become slackened or broken over time. A midpoint cable tension window indicates the correct cable tension making it easy to set up. Once the contacts have been switched they must be reset by resetting the cable to the correct tension level and manually rotating the rest knob.

For extra protection a set of auxiliary contacts are switched when the main contact open allowing for monitoring or signalling equipment to be activated such as a flashing beacon. The auxiliary contacts are electrically isolated form the direct acting switch contacts meaning a closed circuit can be maintained even when the main contacts are in the open position.

Direct opening actions of normally closed contacts

Choice of 1NC/1NO, 2NC/2NO or 3NC/1NO, 4NC contact configurations

Typical 76 meter cable span

Single red high intensity LED status indicator light available (24 Vdc or 120 Vdc)

Die cast zinc housing

Both gold plated or silver plated contacts available

Optional hardware packs available

UL, CE, CSA, SIL 3 capable