ZANDER AACHEN ZLMS Grab Wire Switch 50 mm, Screw, 1 NO, 3 NC
- N° de stock RS:
- 475-683
- Référence fabricant:
- 940050
- Fabricant:
- ZANDER AACHEN
Sous-total (1 unité)*
511,57 €
(TVA exclue)
619,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 22 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 511,57 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 475-683
- Référence fabricant:
- 940050
- Fabricant:
- ZANDER AACHEN
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ZANDER AACHEN | |
| Product Type | Grab Wire Switch | |
| Indicator Type | LED | |
| Contact Configuration | 1 NO, 3 NC | |
| Mounting Orientation | Screw | |
| IP Rating | IP69K, IP67 | |
| Number of Cable Entries | 3 | |
| Series | ZLMS | |
| E-Stop Button | Yes | |
| Contact AC Voltage | 240V ac | |
| Reset Button | Yes | |
| Contact Current | 3A | |
| Contact DC Voltage | 24V dc | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 80°C | |
| Length | 50mm | |
| Housing Material | Stainless Steel | |
| Depth | 57mm | |
| Width | 74mm | |
| Standards/Approvals | ISO 13850, IEC 60947-5-5, CE, TÜV, IEC 60947-5-1, EN 60204-1, EN 60947-5-1, EN 60947-5-5 | |
| Hazardous Area Certification | No | |
| Mechanical Life | 1.5Operations | |
| Conduit Entry | 3 x M20 | |
| Sélectionner tout | ||
|---|---|---|
Marque ZANDER AACHEN | ||
Product Type Grab Wire Switch | ||
Indicator Type LED | ||
Contact Configuration 1 NO, 3 NC | ||
Mounting Orientation Screw | ||
IP Rating IP69K, IP67 | ||
Number of Cable Entries 3 | ||
Series ZLMS | ||
E-Stop Button Yes | ||
Contact AC Voltage 240V ac | ||
Reset Button Yes | ||
Contact Current 3A | ||
Contact DC Voltage 24V dc | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 80°C | ||
Length 50mm | ||
Housing Material Stainless Steel | ||
Depth 57mm | ||
Width 74mm | ||
Standards/Approvals ISO 13850, IEC 60947-5-5, CE, TÜV, IEC 60947-5-1, EN 60204-1, EN 60947-5-1, EN 60947-5-5 | ||
Hazardous Area Certification No | ||
Mechanical Life 1.5Operations | ||
Conduit Entry 3 x M20 | ||
- Pays d'origine :
- DE
The H.ZANDER Safety rope switches are designed to be mounted on machines and sections of conveyors, which cannot be protected by guards. Safety rope switches can initiate the emergency command from any point along the installed rope length. A red LED, which is visible from far off, indicates the switching status. The safety rope switch is also available with stainless steel housing.
Switches off by breakage or tension loss
Protect hazards up to 50 m
Rope tension indicator
Stainless steel housing IP69K
Liens connexes
- ZANDER AACHEN ZLSE Rope Pull Switch 239 mm 3 NC/1 NO
- Telemecanique Sensors XY2CH Grab Wire Switch 19.5 cm 1 NO/1 NC
- ZANDER AACHEN ZCode Series Magnetic Non-Contact Safety Switch 24V dc 1 NO, M12
- Telemecanique Sensors XY2CE Grab Wire Switch, 1 NO/1 NC
- ABB LineStrong3DZ Grab Wire Switch 250 m, 4 NO/4 NC
- ABB LineStrong3D Grab Wire Switch 250 m, 4 NO/4 NC
- ZANDER AACHEN MINOS SL Safety Relay
- ZANDER AACHEN Bridge Rectifier, 250 V