SKF 31309 J2/QCL7CDF Taper 44 mm ID Roller Bearing, 100 mm OD
- N° de stock RS:
- 233-7094
- Référence fabricant:
- 31309 J2/QCL7CDF
- Fabricant:
- SKF
Visuel non contractuel
Sous-total (1 unité)*
525,50 €
(TVA exclue)
635,86 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 28 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 525,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 233-7094
- Référence fabricant:
- 31309 J2/QCL7CDF
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 44mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Cage Material | Sheet Metal | |
| Cone Width | 27.25mm | |
| Number of Rows | 1 | |
| Cup Width | 25mm | |
| Static Load Rating | 204kN | |
| Internal Clearance | CL7C | |
| Outside Diameter | 100mm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 157kN | |
| Limiting Speed | 6700rpm | |
| Series | 31309 | |
| Bearing Material | Steel | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 44mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Cage Material Sheet Metal | ||
Cone Width 27.25mm | ||
Number of Rows 1 | ||
Cup Width 25mm | ||
Static Load Rating 204kN | ||
Internal Clearance CL7C | ||
Outside Diameter 100mm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 157kN | ||
Limiting Speed 6700rpm | ||
Series 31309 | ||
Bearing Material Steel | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in perio
Liens connexes
- SKF 31309 J2/QCL7C Taper 44 mm ID Roller Bearing, 100 mm OD
- RS PRO 31309 Taper 44 mm ID Roller Bearing, 100 mm OD
- SKF 32316 J2 Taper 80 mm ID Roller Bearing, 170 mm OD
- SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32317 J2 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 30222 J2 Taper 110 mm ID Roller Bearing, 200 mm OD
- SKF 30302 J2 Taper 15 mm ID Roller Bearing, 42 mm OD
- SKF 31311 J2/Q Taper 55 mm ID Roller Bearing, 120 mm OD