SKF 32316 J2 Taper 80 mm ID Roller Bearing, 170 mm OD
- N° de stock RS:
- 208-0072
- Référence fabricant:
- 32316 J2
- Fabricant:
- SKF
Sous-total (1 unité)*
386,31 €
(TVA exclue)
467,44 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 08 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 386,31 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0072
- Référence fabricant:
- 32316 J2
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 80mm | |
| Bore Type | Parallel | |
| Outside Diameter | 170mm | |
| Cone Width | 61.5mm | |
| Number of Rows | 1 | |
| Cup Width | 48mm | |
| Static Load Rating | 500kN | |
| Series | 2GD | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 404kN | |
| Limiting Speed | 4000rpm | |
| End Type | Shielded | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 80mm | ||
Bore Type Parallel | ||
Outside Diameter 170mm | ||
Cone Width 61.5mm | ||
Number of Rows 1 | ||
Cup Width 48mm | ||
Static Load Rating 500kN | ||
Series 2GD | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 404kN | ||
Limiting Speed 4000rpm | ||
End Type Shielded | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- FAG 32316-B Taper Roller 80 mm ID Roller Bearing, 170 mm OD
- FAG 32316-A Taper Roller 80 mm ID Roller Bearing, 170 mm OD
- RS PRO 32316 Taper 80 mm ID Roller Bearing, 170 mm OD
- SKF 32307 J2/Q Taper 35 mm ID Roller Bearing, 80 mm OD
- SKF 30316 Taper Roller 80 mm ID Tapered Roller Bearing, 170 mm OD
- SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32317 J2 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 30222 J2 Taper 110 mm ID Roller Bearing, 200 mm OD