Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	SKF
	Product Type	Roller Bearing
	Inside Diameter	40mm
	Race Width	18mm
	Bore Type	Parallel
	Standards/Approvals	No
	Static Load Rating	53kN
	Number of Rows	1
	Outside Diameter	80mm
	Dynamic Load Rating	62kN
	End Type	Shielded
	Limiting Speed	11000rpm

	Sélectionner tout
	Marque SKF
	Product Type Roller Bearing
	Inside Diameter 40mm
	Race Width 18mm
	Bore Type Parallel
	Standards/Approvals No
	Static Load Rating 53kN
	Number of Rows 1
	Outside Diameter 80mm
	Dynamic Load Rating 62kN
	End Type Shielded
	Limiting Speed 11000rpm

Pays d'origine :: DE

SKF Roller Bearing, 40mm Inside Diameter, 80mm Outside Diameter - NUP 208 ECP/C3

This roller bearing is a single-row cylindrical roller bearing designed to support radial loads in rotating equipment within automation, electrical and mechanical systems. It features a cylindrical bore and shielded ends to protect rolling elements during operation while accommodating internal running clearances suited to slightly increased radial play.

Features & Benefits

• 62 kN dynamic load rating delivers high radial capacity
• 53 kN static load rating resists heavy stationary loads
• 11 000 r/min limiting speed enables high-speed usage
• Non-metallic cage reduces noise and low-friction operation
• C3 internal clearance permits thermal expansion under load
• Shielded end design minimises contamination ingress

Applications

• Suitable for high-speed motor spindles in automation equipment
• Ideal for drive rollers in conveyor assemblies
• Used with gearbox shafts subject to heavy radial loads
• Can be used for electrical machine rotor support
• Suitable for precision test rigs requiring defined clearance

What mass should installers expect when handling this item?

The bearing has a mass of 0.4kg, allowing straightforward manual fitting and handling.

Which seat and abutment dimensions are relevant for housing design?

Key abutment values include da min 47mm, db min 56mm and Da max 72.8mm for correct seating.

What are the reference and calculation parameters for life estimation?

Use a reference speed of 9 500 r/min and calculation factor kr 0.15 with fatigue limit Pu 6.7 kN for L10 assessments.

How does the internal geometry influence axial location?

The single-row NUP design permits axial locating on one side using a flange or shoulder while enabling shaft displacement on the opposite side.

Which corner radii must mating components respect?

Minimum fillet radii to mate with the races are r1,2 min 1.1mm and r3,4 min 1.1mm.

SKF NUP 208 ECP/C3 40 mm ID Roller Bearing, 80 mm OD

Frais de livraison offerts pour toute commande de plus de 90,00 €