SKF 33024 Taper 120 mm ID Roller Bearing, 180 mm OD
- N° de stock RS:
- 208-0089
- Référence fabricant:
- 33024
- Fabricant:
- SKF
Sous-total (1 unité)*
485,25 €
(TVA exclue)
587,15 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 25 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 485,25 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0089
- Référence fabricant:
- 33024
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 120mm | |
| Bore Type | Parallel | |
| Cup Width | 38mm | |
| Static Load Rating | 540kN | |
| Limiting Speed | 3400rpm | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 356kN | |
| Standards/Approvals | No | |
| Number of Rows | 1 | |
| Cone Width | 48.75mm | |
| Outside Diameter | 180mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 120mm | ||
Bore Type Parallel | ||
Cup Width 38mm | ||
Static Load Rating 540kN | ||
Limiting Speed 3400rpm | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 356kN | ||
Standards/Approvals No | ||
Number of Rows 1 | ||
Cone Width 48.75mm | ||
Outside Diameter 180mm | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- FAG 33024 Taper Roller 120 mm ID Tapered Roller Bearing, 180 mm OD
- SKF 32024 X Taper 120 mm ID Roller Bearing, 180 mm OD
- SKF 23024-2RS5/VT143 Taper 120 mm ID Roller Bearing, 180 mm OD
- SNR 32024A Taper Roller 120 mm ID Roller Bearing, 180 mm OD
- SKF 32224/DF Taper Roller 120 mm ID Taper Roller Bearing, 215 mm OD
- SKF T4CB 120 Taper 120 mm ID Roller Bearing, 170 mm OD
- SKF 30317 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 30220 Taper 100 mm ID Roller Bearing, 180 mm OD