SKF 30317 Taper 85 mm ID Roller Bearing, 180 mm OD
- N° de stock RS:
- 208-0001
- Référence fabricant:
- 30317
- Fabricant:
- SKF
Sous-total (1 unité)*
342,14 €
(TVA exclue)
413,99 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 342,14 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0001
- Référence fabricant:
- 30317
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 85mm | |
| Bore Type | Parallel | |
| Limiting Speed | 3800rpm | |
| Outside Diameter | 180mm | |
| Static Load Rating | 365kN | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 372kN | |
| End Type | Shielded | |
| Cone Width | 44.84mm | |
| Number of Rows | 1 | |
| Cup Width | 34mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 85mm | ||
Bore Type Parallel | ||
Limiting Speed 3800rpm | ||
Outside Diameter 180mm | ||
Static Load Rating 365kN | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 372kN | ||
End Type Shielded | ||
Cone Width 44.84mm | ||
Number of Rows 1 | ||
Cup Width 34mm | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- FAG 30317-A Taper Roller 85 mm ID Roller Bearing, 180 mm OD
- SKF 32317 BJ2 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 32317 J2 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 21317 E Taper 85 mm ID Roller Bearing, 180 mm OD
- NTN 30317DU Taper Roller 85 mm ID Roller Bearing, 180 mm OD
- NTN 30317U Taper Roller 85 mm ID Roller Bearing, 180 mm OD
- SKF 30220 Taper 100 mm ID Roller Bearing, 180 mm OD
- SKF 33024 Taper 120 mm ID Roller Bearing, 180 mm OD