SKF 32934 Taper 170 mm ID Roller Bearing, 230 mm OD
- N° de stock RS:
- 208-0078
- Référence fabricant:
- 32934
- Fabricant:
- SKF
Sous-total (1 unité)*
661,36 €
(TVA exclue)
800,25 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 28 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 661,36 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0078
- Référence fabricant:
- 32934
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 170mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Bearing Material | Steel | |
| Cone Width | 41.06mm | |
| Static Load Rating | 585kN | |
| Outside Diameter | 230mm | |
| End Type | Open | |
| Number of Rows | 1 | |
| Bearing Dynamic Load Rating | 351kN | |
| Standards/Approvals | No | |
| Limiting Speed | 2400rpm | |
| Cup Width | 30mm | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 170mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Bearing Material Steel | ||
Cone Width 41.06mm | ||
Static Load Rating 585kN | ||
Outside Diameter 230mm | ||
End Type Open | ||
Number of Rows 1 | ||
Bearing Dynamic Load Rating 351kN | ||
Standards/Approvals No | ||
Limiting Speed 2400rpm | ||
Cup Width 30mm | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
SKF Taper Roller Bearing, 170 mm ID, 230 mm OD - 32934
This SKF bearing has tapered raceways and rollers specifically designed to handle radial and axial loads acting at the same time. Its raceways meet at a common point on the bearing's axis to provide a true rolling action and very low levels of friction. This reduces operational noise and allows the bearing to better maintain a pre-load. The unit's crowned raceway profile ensures even load distribution along the contact surfaces to reduce stress peaks at the roller ends. This also lowers the unit's sensitivity to misalignment and shaft deflection.
• Optimised surface finish supports the formation of a hydrodynamic lubricant for lower frictional heat and flange wear
• Excellent consistency of roller profiles and sizes for optimal load distribution
• Reduced temperature peaks during running-in periods to lessen wear
• Separable, single-row bearing for easier mounting, dismounting and inspection
Application Information
• Rolling mills
• Gearbox manufacturing
• Mining industry
• Hoisting and lifting equipment
Can you use this component in rigid bearing applications?
Yes, this bearing is suitable for rigid bearing applications. You can achieve this setup by adjusting this bearing against a second tapered roller bearing and applying a pre-load.
Liens connexes
- FAG 32934 Taper Roller 170 mm ID Roller Bearing, 230 mm OD
- RS PRO 32934 Taper 170 mm ID Roller Bearing, 230 mm OD
- NTN 32934XU Taper Roller 170 mm ID Roller Bearing, 230 mm OD
- NTN 4T-JHM534149/JHM534110PK Taper Roller 170 mm ID Roller Bearing, 230 mm OD
- SKF 32219 Taper 95 mm ID Roller Bearing, 170 mm OD
- SKF 30219 Taper Roller 95 mm ID Tapered Roller Bearing, 170 mm OD
- SKF 30316 Taper Roller 80 mm ID Tapered Roller Bearing, 170 mm OD
- SKF 32316 J2 Taper 80 mm ID Roller Bearing, 170 mm OD