SKF 32034 X Taper 170 mm ID Roller Bearing, 260 mm OD
- N° de stock RS:
- 208-0037
- Référence fabricant:
- 32034 X
- Fabricant:
- SKF
Sous-total (1 unité)*
1 299,34 €
(TVA exclue)
1 572,20 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 30 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 299,34 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0037
- Référence fabricant:
- 32034 X
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 170mm | |
| Bore Type | Parallel | |
| Bearing Dynamic Load Rating | 625kN | |
| End Type | Shielded | |
| Static Load Rating | 915kN | |
| Cup Width | 43mm | |
| Number of Rows | 1 | |
| Cone Width | 57mm | |
| Limiting Speed | 2200rpm | |
| Standards/Approvals | No | |
| Outside Diameter | 260mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 170mm | ||
Bore Type Parallel | ||
Bearing Dynamic Load Rating 625kN | ||
End Type Shielded | ||
Static Load Rating 915kN | ||
Cup Width 43mm | ||
Number of Rows 1 | ||
Cone Width 57mm | ||
Limiting Speed 2200rpm | ||
Standards/Approvals No | ||
Outside Diameter 260mm | ||
Bearing Type Taper | ||
- Pays d'origine :
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Liens connexes
- NTN 32034XU Taper Roller 170 mm ID Roller Bearing, 260 mm OD
- NTN 23034EAKW33 Taper 170 mm ID Spherical Roller Bearing, 260 mm OD
- NTN 23034EAKW33C3 Taper 170 mm ID Spherical Roller Bearing, 260 mm OD
- SKF 32938 Taper 190 mm ID Roller Bearing, 260 mm OD
- SKF NU 1034 M/C3 170 mm ID Roller Bearing, 260 mm OD
- SKF 32219 Taper 95 mm ID Roller Bearing, 170 mm OD
- SKF 32934 Taper 170 mm ID Roller Bearing, 230 mm OD
- SKF 30219 Taper Roller 95 mm ID Tapered Roller Bearing, 170 mm OD