SKF NJ 2311 ECP/C3 55 mm ID Roller Bearing, 120 mm OD
- N° de stock RS:
- 195-9698
- Référence fabricant:
- NJ 2311 ECP/C3
- Fabricant:
- SKF
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
292,23 €
(TVA exclue)
353,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 292,23 € |
| 5 - 9 | 272,37 € |
| 10 - 24 | 266,70 € |
| 25 + | 261,02 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 195-9698
- Référence fabricant:
- NJ 2311 ECP/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55mm | |
| Race Width | 43mm | |
| Bore Type | Cylindrical | |
| End Type | Open | |
| Dynamic Load Rating | 232kN | |
| Outside Diameter | 12mm | |
| Limiting Speed | 7000rpm | |
| Number of Rows | 1 | |
| Standards/Approvals | No | |
| Series | NJ 2311 ECP | |
| Static Load Rating | 232kN | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 55mm | ||
Race Width 43mm | ||
Bore Type Cylindrical | ||
End Type Open | ||
Dynamic Load Rating 232kN | ||
Outside Diameter 12mm | ||
Limiting Speed 7000rpm | ||
Number of Rows 1 | ||
Standards/Approvals No | ||
Series NJ 2311 ECP | ||
Static Load Rating 232kN | ||
Statut RoHS : Exempté
Single row cylindrical roller bearings
SKF single row cylindrical roller bearings are available in many designs, series and sizes.
Features:
C3 Clearance on this model.
High load carrying capacity
High stiffness
Accommodate axial displacement
Except for bearings with flanges on both the inner and outer rings.
Low friction
The open flange design,
together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capability.
Long service life
The logarithmic roller profile reduces edge stresses at the roller/raceway contact and sensitivity to misalignment and shaft deflection.
Enhanced operational reliability
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.
Separable and interchangeable
The separable components of SKF cylindrical roller bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections.
Liens connexes
- SKF NJ 2311 ECP 55 mm ID Cylindrical Roller Bearing, 120 mm OD
- SKF NJ 2311 ECP/C4 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 2311 ECML/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NU 2311 ECP/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 311 ECP/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 2211 ECP/C3 55 mm ID Cylindrical Roller Bearing, 100 mm OD
- SKF NJ 211 ECP/C3 Cylindrical 55 mm ID Cylindrical Roller Bearing, 100 mm OD
- SKF NU 2311 ECP 55 mm ID Roller Bearing, 120 mm OD