SKF NJ 2311 ECP 55 mm ID Cylindrical Roller Bearing, 120 mm OD
- N° de stock RS:
- 586-720
- Référence fabricant:
- NJ 2311 ECP
- Fabricant:
- SKF
Sous-total (1 paquet de 2 unités)*
379,50 €
(TVA exclue)
459,20 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 21 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 379,50 € | 189,75 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 586-720
- Référence fabricant:
- NJ 2311 ECP
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Cylindrical Roller Bearing | |
| Inside Diameter | 55mm | |
| Race Width | 43mm | |
| Bore Type | Parallel | |
| Cage Material | Non-Metallic | |
| Roller Material | Bearing Steel | |
| Bearing Material | Bearing Steel | |
| Number of Rows | 1 | |
| Limiting Speed | 7000rpm | |
| Series | NJ | |
| Standards/Approvals | RoHS Compliance | |
| End Type | Open | |
| Dynamic Load Rating | 232kN | |
| Static Load Rating | 232kN | |
| Outside Diameter | 120mm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Cylindrical Roller Bearing | ||
Inside Diameter 55mm | ||
Race Width 43mm | ||
Bore Type Parallel | ||
Cage Material Non-Metallic | ||
Roller Material Bearing Steel | ||
Bearing Material Bearing Steel | ||
Number of Rows 1 | ||
Limiting Speed 7000rpm | ||
Series NJ | ||
Standards/Approvals RoHS Compliance | ||
End Type Open | ||
Dynamic Load Rating 232kN | ||
Static Load Rating 232kN | ||
Outside Diameter 120mm | ||
- Pays d'origine :
- DE
The SKF Single row cylindrical roller bearings are designed to accommodate high radial loads in combination with high speeds. Having two integral flanges on the outer ring and one on the inner ring, NJ design bearings can accommodate axial displacement in one direction. An important feature is the separable design, which facilitates mounting and enables the bearing components to be interchanged.
High radial load carrying capacity
Low friction
Long service life
Locate the shaft axially in one direction
Separable design
Liens connexes
- SKF NJ 2311 ECP/C4 55 mm ID Roller Bearing, 120 mm OD
- SKF NUP 2311 ECP 55 mm ID Cylindrical Roller Bearing, 120 mm OD
- SKF NJ 2311 ECP/C3 55 mm ID Roller Bearing, 12 mm OD
- SKF NJ 311 ECP 55 mm ID Cylindrical Roller Bearing, 120 mm OD
- SKF NU 2311 ECP 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 2311 ECML/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NU 2311 ECP/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 211 ECP Cylindrical 55 mm ID Cylindrical Roller Bearing, 100 mm OD