Timken 32215 Taper 75 mm ID Metric Roller Bearing, 130 mm OD
- N° de stock RS:
- 193-1031
- Référence fabricant:
- 32215
- Fabricant:
- Timken
Bénéficiez d'une remise sur les achats en gros
Ajoutez 5 de plus pour économiser 5%
Consulter les options de prix de grosSous-total (1 unité)*
105,31 €
(TVA exclue)
127,43 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 02 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Économie |
|---|---|---|
| 1 - 4 | 105,31 € | - |
| 5 - 9 | 99,10 € | 5% |
| 10 - 24 | 97,10 € | 7% |
| 25 + | 94,99 € | 9% |
*Prix donné à titre indicatif
- N° de stock RS:
- 193-1031
- Référence fabricant:
- 32215
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 75mm | |
| Bore Type | Tapered | |
| End Type | Shielded | |
| Outside Diameter | 130mm | |
| Static Load Rating | 227kN | |
| Cup Width | 27mm | |
| Number of Rows | 1 | |
| Cone Width | 33.25mm | |
| Bearing Dynamic Load Rating | 218kN | |
| Limiting Speed | 5000rpm | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 75mm | ||
Bore Type Tapered | ||
End Type Shielded | ||
Outside Diameter 130mm | ||
Static Load Rating 227kN | ||
Cup Width 27mm | ||
Number of Rows 1 | ||
Cone Width 33.25mm | ||
Bearing Dynamic Load Rating 218kN | ||
Limiting Speed 5000rpm | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
- Pays d'origine :
- RO
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Liens connexes
- SKF 32215 Taper 75 mm ID Roller Bearing, 130 mm OD
- FAG 32215-A Taper Roller 75 mm ID Roller Bearing, 130 mm OD
- RS PRO 32215 Taper 75 mm ID Roller Bearing, 130 mm OD
- Timken 32015X Taper 75 mm ID Metric Roller Bearing, 115 mm OD
- Timken 32009X Taper 45 mm ID Metric Roller Bearing, 75 mm OD
- Timken JM716649/JM716610 Taper 85 mm ID Roller Bearing, 130 mm OD
- Timken 30306 Taper 30 mm ID Metric Roller Bearing, 72 mm OD
- Timken 30304 Taper 20 mm ID Metric Roller Bearing, 52 mm OD