Timken JM716649/JM716610 Taper 85 mm ID Roller Bearing, 130 mm OD
- N° de stock RS:
- 137-1931
- Référence fabricant:
- JM716649/JM716610
- Fabricant:
- Timken
Offre groupée disponible
Sous-total (1 unité)*
121,16 €
(TVA exclue)
146,60 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 - 4 | 121,16 € |
| 5 - 9 | 116,31 € |
| 10 - 24 | 113,89 € |
| 25 + | 111,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 137-1931
- Référence fabricant:
- JM716649/JM716610
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Roller Bearing | |
| Inside Diameter | 85mm | |
| Bore Type | Parallel | |
| Roller Material | Steel | |
| Cage Material | Steel | |
| Outside Diameter | 130mm | |
| Cone Width | 24mm | |
| Static Load Rating | 245kN | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 161kN | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Roller Bearing | ||
Inside Diameter 85mm | ||
Bore Type Parallel | ||
Roller Material Steel | ||
Cage Material Steel | ||
Outside Diameter 130mm | ||
Cone Width 24mm | ||
Static Load Rating 245kN | ||
End Type Open | ||
Bearing Dynamic Load Rating 161kN | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
Tapered Roller Bearings - TS (Tapered Single) Imperial/Metric
These bearings are the most basic and most widely used type of tapered roller bearings. They consist of two main separable parts, the cone (inner ring) assembly and the cup (outer ring). They are typically mounted in opposing pairs on a shaft.
Features and Benefits
• Imperial / Metric;• One piece stamped steel cage retains rollers on the cone;• Inner diameter range 7.937 mm to 863.600 mm;• Outer diameter range 31.991 mm to 1060.000 mm;• Single cone and cup
Product Application Information
Typical applications include, vehicle front wheels, differential and pinion configurations, conveyor rolls, machine tool spindles and trailer wheels.
Timken
Liens connexes
- NTN 4T-JM716649/JM716610 Tapered 85 mm ID Taper Roller Bearing, 130 mm OD
- NTN 4T-JM716649/JM716610PK Tapered Roller 85 mm ID Tapered Roller Bearing, 130 mm OD
- Timken 32215 Taper 75 mm ID Metric Roller Bearing, 130 mm OD
- Timken 32209 Taper 45 mm ID Metric Roller Bearing, 85 mm OD
- Timken 18790/18720 Taper 50.8 mm ID Roller Bearing, 85 mm OD
- NTN 4T-JM716648/JM716610PK Taper Roller 85 mm ID Taper Roller Bearing, 130 mm OD
- SKF 33017 Taper 85 mm ID Roller Bearing, 130 mm OD
- FAG 33017 Taper Roller 85 mm ID Tapered Roller Bearing, 130 mm OD