Timken 30308 Taper 40 mm ID Metric Roller Bearing, 90 mm OD
- N° de stock RS:
- 193-1004
- Référence fabricant:
- 30308
- Fabricant:
- Timken
Offre groupée disponible
Sous-total (1 unité)*
45,95 €
(TVA exclue)
55,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 04 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 45,95 € |
| 5 - 9 | 43,23 € |
| 10 - 24 | 42,36 € |
| 25 + | 41,45 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 193-1004
- Référence fabricant:
- 30308
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 40mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Cage Material | Sheet Metal | |
| Bearing Dynamic Load Rating | 117kN | |
| Series | TRB | |
| Limiting Speed | 8000rpm | |
| Outside Diameter | 90mm | |
| Static Load Rating | 102kN | |
| Cup Width | 20mm | |
| Number of Rows | 1 | |
| Cone Width | 25.25mm | |
| Bearing Material | Steel | |
| Standards/Approvals | No | |
| Race Type | Grooved | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 40mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Cage Material Sheet Metal | ||
Bearing Dynamic Load Rating 117kN | ||
Series TRB | ||
Limiting Speed 8000rpm | ||
Outside Diameter 90mm | ||
Static Load Rating 102kN | ||
Cup Width 20mm | ||
Number of Rows 1 | ||
Cone Width 25.25mm | ||
Bearing Material Steel | ||
Standards/Approvals No | ||
Race Type Grooved | ||
Bearing Type Taper | ||
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Liens connexes
- NTN 4T-30308 Taper Roller 40 mm ID Taper Roller Bearing, 90 mm OD
- SKF 30308 Taper 40 mm ID Roller Bearing, 90 mm OD
- Timken 32210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- Timken 33210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- Timken 30210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- Timken 32011X Taper 55 mm ID Metric Roller Bearing, 90 mm OD
- RS PRO 30308 Taper 40 mm ID Roller Bearing, 90 mm OD
- FAG 30308-A Taper 40 mm ID Roller Bearing, 90 mm OD