FAG 30308-A Taper 40 mm ID Roller Bearing, 90 mm OD
- N° de stock RS:
- 174-0984
- Référence fabricant:
- 30308-A
- Fabricant:
- FAG
Sous-total (1 unité)*
48,41 €
(TVA exclue)
58,58 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 20 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 48,41 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 174-0984
- Référence fabricant:
- 30308-A
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 40mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Limiting Speed | 8500rpm | |
| Standards/Approvals | No | |
| Static Load Rating | 102kN | |
| Cone Width | 25.25mm | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 91kN | |
| Series | 303 | |
| Outside Diameter | 90mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 40mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Limiting Speed 8500rpm | ||
Standards/Approvals No | ||
Static Load Rating 102kN | ||
Cone Width 25.25mm | ||
End Type Open | ||
Bearing Dynamic Load Rating 91kN | ||
Series 303 | ||
Outside Diameter 90mm | ||
Bearing Type Taper | ||
Tapered roller bearings comprise solid inner and outer rings with tapered raceways and tapered rollers in a window cage. Open bearings are not self-retaining. As a result, the inner ring with the rollers and the cage can be fitted separately from the outer ring. Metric and inch size bearings are available. Designs with a K in the designation have inch dimensions. For new designs, however, bearings in metric sizes should always be used in preference.
Radial and axial load capacity
Contact angle
Compensation of angular misalignments
Matched bearings
Integral tapered roller bearings
No setting of axial internal clearance required
Sealing
Lubrication
Operating temperature
Cages
Suffixes
Liens connexes
- SKF 30308 Taper 40 mm ID Roller Bearing, 90 mm OD
- NTN 4T-30308 Taper Roller 40 mm ID Roller Bearing, 90 mm OD
- Timken 30308 Taper 40 mm ID Metric Roller Bearing, 90 mm OD
- RS PRO 30308 Taper 40 mm ID Roller Bearing, 90 mm OD
- FAG 31308-XL Taper 40 mm ID Roller Bearing, 90 mm OD
- FAG 32308-A Taper Roller 40 mm ID Tapered Roller Bearing, 90 mm OD
- FAG 33118 Taper Roller 90 mm ID Roller Bearing, 150 mm OD
- FAG 31318 Taper Roller 90 mm ID Roller Bearing, 190 mm OD