INA HK2220-B 22 mm ID Roller Bearing Drawn Cup Needle, 28 mm OD
- N° de stock RS:
- 137-1760
- Référence fabricant:
- HK2220-B
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
8,77 €
(TVA exclue)
10,61 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 12 unité(s) expédiée(s) à partir du 04 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 8,77 € |
| 5 - 9 | 8,41 € |
| 10 - 24 | 8,24 € |
| 25 + | 8,07 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 137-1760
- Référence fabricant:
- HK2220-B
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 22mm | |
| Race Width | 20mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Number of Rows | 1 | |
| Static Load Rating | 29000N | |
| Maximum Speed - Oil | 11700rpm | |
| Dynamic Load Rating | 16500N | |
| End Type | Open | |
| Standards/Approvals | No | |
| Limiting Speed | 11700rpm | |
| Maximum Speed - Grease | 7000rpm | |
| Outside Diameter | 28mm | |
| Bearing Type | Drawn Cup Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 22mm | ||
Race Width 20mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Number of Rows 1 | ||
Static Load Rating 29000N | ||
Maximum Speed - Oil 11700rpm | ||
Dynamic Load Rating 16500N | ||
End Type Open | ||
Standards/Approvals No | ||
Limiting Speed 11700rpm | ||
Maximum Speed - Grease 7000rpm | ||
Outside Diameter 28mm | ||
Bearing Type Drawn Cup Needle | ||
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.;Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.;Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides;RS - Contact seal on one side;ZW - Double row design, with lubrication hole
INA
Liens connexes
- INA HK2820-B 28 mm ID Roller Bearing Drawn Cup Needle, 35 mm OD
- INA HK2212-B 22 mm ID Roller Bearing Drawn Cup Needle, 28 mm OD
- INA HK0606-B 6 mm ID Roller Bearing Drawn Cup Needle, 10 mm OD
- INA HK0910-B 9 mm ID Roller Bearing Drawn Cup Needle, 13 mm OD
- INA HK4520-B 45 mm ID Roller Bearing Drawn Cup Needle, 52 mm OD
- INA BK0709-B 7 mm ID Roller Bearing Drawn Cup Needle, 11 mm OD
- INA HK4512-B 45 mm ID Roller Bearing Drawn Cup Needle, 52 mm OD
- INA HK3516-B 35 mm ID Roller Bearing Drawn Cup Needle, 42 mm OD