INA HK1712-B 17 mm ID Roller Bearing Drawn Cup Needle, 23 mm OD
- N° de stock RS:
- 137-1748
- Référence fabricant:
- HK1712-B
- Fabricant:
- INA
Offre groupée disponible
Sous-total (1 unité)*
7,29 €
(TVA exclue)
8,82 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 39 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 7,29 € |
| 5 - 9 | 7,01 € |
| 10 - 24 | 6,87 € |
| 25 + | 6,71 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 137-1748
- Référence fabricant:
- HK1712-B
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 17mm | |
| Race Width | 12mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Outside Diameter | 23mm | |
| Static Load Rating | 10300N | |
| Number of Rows | 1 | |
| Dynamic Load Rating | 7900N | |
| Maximum Speed - Grease | 9800rpm | |
| Maximum Speed - Oil | 14700rpm | |
| Limiting Speed | 14700rpm | |
| End Type | Open | |
| Standards/Approvals | No | |
| Bearing Type | Drawn Cup Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Roller Bearing | ||
Inside Diameter 17mm | ||
Race Width 12mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Outside Diameter 23mm | ||
Static Load Rating 10300N | ||
Number of Rows 1 | ||
Dynamic Load Rating 7900N | ||
Maximum Speed - Grease 9800rpm | ||
Maximum Speed - Oil 14700rpm | ||
Limiting Speed 14700rpm | ||
End Type Open | ||
Standards/Approvals No | ||
Bearing Type Drawn Cup Needle | ||
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.;Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.;Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides;RS - Contact seal on one side;ZW - Double row design, with lubrication hole
INA
Liens connexes
- NTN HK1712FM 17 mm ID Needle Roller Bearing Needle Roller 23 mm OD
- INA HN5025 50 mm ID Roller Bearing Drawn Cup Needle Roller, 58 mm OD
- INA HN1210 12 mm ID Roller Bearing Drawn Cup Needle Roller, 16 mm OD
- INA HK5025 50 mm ID Roller Bearing Drawn Cup Needle, 58 mm OD
- INA HK3224 32 mm ID Roller Bearing Drawn Cup Needle, 39 mm OD
- INA HK5020 50 mm ID Roller Bearing Drawn Cup Needle, 58 mm OD
- INA HK6032 60 mm ID Roller Bearing Drawn Cup Needle, 68 mm OD
- INA HK5528 55 mm ID Roller Bearing Drawn Cup Needle, 63 mm OD