SKF NKX 40 Z 40 mm ID Roller Bearing Needle Roller, Thrust Ball, 52 mm OD
- N° de stock RS:
- 463-831
- Référence fabricant:
- NKX 40 Z
- Fabricant:
- SKF
Sous-total (1 unité)*
162,49 €
(TVA exclue)
196,61 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 162,49 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 463-831
- Référence fabricant:
- NKX 40 Z
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 40mm | |
| Race Width | 32mm | |
| Series | NKX 40 Z | |
| Bearing Material | Bearing Steel | |
| Static Load Rating | 51kN | |
| Limiting Speed | 4000rpm | |
| Outside Diameter | 52mm | |
| Dynamic Load Rating | 26.4kN | |
| Standards/Approvals | RoHS | |
| Bearing Type | Needle Roller, Thrust Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 40mm | ||
Race Width 32mm | ||
Series NKX 40 Z | ||
Bearing Material Bearing Steel | ||
Static Load Rating 51kN | ||
Limiting Speed 4000rpm | ||
Outside Diameter 52mm | ||
Dynamic Load Rating 26.4kN | ||
Standards/Approvals RoHS | ||
Bearing Type Needle Roller, Thrust Ball | ||
The SKF Bearings consist of a radial needle roller bearing combined with a thrust ball bearing. Together they can accommodate both radial loads and axial loads in one direction. In addition, they can operate at relatively high speeds. Their low cross-sectional height makes the bearings particularly suitable for applications where other types of locating bearing arrangements occupy too much space. The thrust part is capped with a cover that forms a gap-type seal to retain the grease in the bearings.
Accommodate radial and axial loads in one direction
High load carrying capacity
Relatively high-speed capability
Low cross section
Non-separable design
Liens connexes
- SKF NKX 15 Z 15 mm ID Combined Needle Roller & Thrust Ball Bearing Thrust Ball 24 mm OD
- SKF NKX 35 Z 35 mm ID Needle Roller Bearing Thrust Ball 47 mm OD
- SKF NKX 30 Z 30 mm ID Combined Needle Roller & Thrust Ball Bearing Needle, 42 mm OD
- SKF NKX 20 Z 20 mm ID Roller Bearing Needle Roller 30 mm OD
- SKF NKX 12 Z 12 mm ID Roller Bearing Needle Roller 21 mm OD
- SKF NKX 45 Z 45 mm ID Roller Bearing Thrust Ball 58 mm OD
- SKF NKX 17 Z 17 mm ID Roller Bearing Thrust Ball 26 mm OD
- SKF NKX 60 Z 60 mm ID Roller Bearing Thrust Ball 72 mm OD