Huber+Suhner 6610_SMA-50-2/199_NE RF AttenuatorStraight 3 dBMaleFemale
- N° de stock RS:
- 716-5084
- Numéro d'article Distrelec:
- 303-72-684
- Référence fabricant:
- 6610_SMA-50-2/199_NE
- Fabricant:
- Huber+Suhner
Sous-total (1 unité)*
120,12 €
(TVA exclue)
145,35 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 15 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 14 unité(s) expédiée(s) à partir du 10 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 120,12 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 716-5084
- Numéro d'article Distrelec:
- 303-72-684
- Référence fabricant:
- 6610_SMA-50-2/199_NE
- Fabricant:
- Huber+Suhner
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Huber+Suhner | |
| Product Type | RF Attenuator | |
| Interface Type | SMA Plug to Socket | |
| Impedance | 50Ω | |
| Maximum Frequency | 6GHz | |
| Body Plating | Gold | |
| Contact Plating | Nickel | |
| Contact Material | Copper Alloy | |
| Low Power | Yes | |
| Maximum Attenuation | 3dB | |
| Connector Type | SMA | |
| Minimum Operating Temperature | -20°C | |
| Orientation | Straight | |
| Maximum Operating Temperature | 85°C | |
| Connector Gender A | Male | |
| Standards/Approvals | No | |
| Connector Gender B | Female | |
| Sélectionner tout | ||
|---|---|---|
Marque Huber+Suhner | ||
Product Type RF Attenuator | ||
Interface Type SMA Plug to Socket | ||
Impedance 50Ω | ||
Maximum Frequency 6GHz | ||
Body Plating Gold | ||
Contact Plating Nickel | ||
Contact Material Copper Alloy | ||
Low Power Yes | ||
Maximum Attenuation 3dB | ||
Connector Type SMA | ||
Minimum Operating Temperature -20°C | ||
Orientation Straight | ||
Maximum Operating Temperature 85°C | ||
Connector Gender A Male | ||
Standards/Approvals No | ||
Connector Gender B Female | ||
Huber+Suhner RF Attenuator, 10dB Attenuation, 6GHz Maximum Frequency - 6610_SMA-50-2/199_NE
This RF attenuator provides controlled signal reduction for 50 Ω systems up to microwave frequencies. It connects directly between SMA interfaces and is intended for low-power attenuation tasks across communications and test setups. The unit is finished in stainless steel and configured in a straight, male-to-female orientation to simplify inline insertion into measurement or signal-conditioning chains.
Features and Benefits:
• 10 dB nominal attenuation for predictable signal level reduction
• Operates from 0 to 6 GHz to cover common microwave bands
• 50 Ω impedance minimises mismatch and reflections
• Copper-alloy contacts ensure consistent electrical conductivity
• Stainless-steel plating offers mechanical resilience and corrosion resistance
• Rated for -20 to 85 °C for use in varied temperature environments
• Operates from 0 to 6 GHz to cover common microwave bands
• 50 Ω impedance minimises mismatch and reflections
• Copper-alloy contacts ensure consistent electrical conductivity
• Stainless-steel plating offers mechanical resilience and corrosion resistance
• Rated for -20 to 85 °C for use in varied temperature environments
Applications
• Suitable for signal level control in RF test equipment setups
• Ideal for attenuation when aligning microwave transceivers
• Used with laboratory analysers for repeatable measurement conditions
• Can be used for link-budget adjustments in GHz communications systems
• Used for prototyping and bench testing in automation and electronics labs
• Ideal for attenuation when aligning microwave transceivers
• Used with laboratory analysers for repeatable measurement conditions
• Can be used for link-budget adjustments in GHz communications systems
• Used for prototyping and bench testing in automation and electronics labs
What connector arrangement does it use for inline connections?
It employs a straight SMA plug-to-socket arrangement with a male end mating to a female connector for direct inline insertion.
How does the material selection affect electrical performance?
Copper-alloy contacts deliver low contact resistance while stainless-steel plating maintains surface integrity without altering impedance characteristics.
Is this unit suitable for high-power transmission lines?
It is specified as a low-power attenuator, so it is intended for signal-level applications rather than high-power RF transmission.
What environmental limits govern its deployment?
The attenuator is rated to operate between -20 and 85 °C, making it suitable for controlled indoor and many field conditions.
Liens connexes
- Huber+Suhner 6604_SMA-50-1/199_NE RF AttenuatorStraight 4 dBMaleFemale
- Huber+Suhner 6630_SMA-50-1/199_NE RF AttenuatorStraight 30 dBMaleFemale
- Huber+Suhner 6620_SMA-50-2/199_NE RF AttenuatorStraight 0.75 dBMaleFemale
- Huber+Suhner 6630_SMA-50-2/199_NE RF AttenuatorStraight 0.9 dBMaleFemale
- Huber+Suhner 6603_SMA-50-2/199_NE RF AttenuatorStraight 3 dBMaleFemale
- Huber+Suhner 6602_SMA-50-2/199_NE RF AttenuatorStraight 3 dBMaleFemale
- Huber+Suhner 6620_SMA-50-1/199_NE RF AttenuatorStraight 0.5 dBMaleFemale
- Huber+Suhner 6601_SMA-50-1/199_NE RF AttenuatorStraight 1 dBMaleFemale