Eaton Residual Current Circuit Breaker with Overload Protection, 10 A Current Rating, 1-Pole, 30 mA Trip Sensitivity,

Voir l’ensemble des RCBOs

Sous-total (1 unité)*

168,06 €

(TVA exclue)

203,35 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Commandes ci-dessous 75,00 € coût (TVA exclue) 5,95 €.
En stock
  • 38 unité(s) prête(s) à être expédiée(s)
  • Plus 28 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 36 unité(s) expédiée(s) à partir du 02 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +168,06 €

*Prix donné à titre indicatif

N° de stock RS:
183-3543
Référence fabricant:
236962 PXK-C10/1N/003-A
Fabricant:
Eaton
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Eaton

Product Type

Residual Current Circuit Breaker with Overload Protection

Current Rating

10 A

Number of Poles

1

Range

PXK

Trip Sensitivity

30mA

Tripping Characteristics

Type C

Rated AC Voltage

240 V ac

Earth Leakage Protection Type

Type A

Depth

69.5mm

Width

2 mm

Application

Commercial, Residential

Standards/Approvals

IEC/EN 61009

Breaking Capacity

10kA

Tripping Mechanism

Non-Delayed

Pays d'origine :
AT

Eaton Residual Current Circuit Breaker With Overcurrent Protection, 1+N Poles - PXK-C Series - PXK-C10/1N/003-A


Looking for a combined solution that detects and protects against overload and short circuits? This Eaton RCBO (residual current circuit breaker with overcurrent protection) combines RCB (residual current device) and MCB (miniature circuit breaker) functionality to protect against earth leakage as well as overcurrent. It interrupts and disconnects power supplies when it detects a fault, protecting operators from electric shocks and equipment from damage. Attach this unit to your industrial circuits to enhance workplace safety.

• Operating temperature range of -25°C to +40°C for use with devices in demanding indoor and outdoor settings

• Trip sensitivity of 30mA prevents risk of electric shocks

• Type-C tripping characteristics ensure the device triggers disconnect within 5 seconds after fault detection

Why is an RCBO better than a circuit breaker?


Circuit breakers only disconnect the flow of current after a fault occurs. An RCBO, such as this one from Eaton, incorporates a circuit breaker and an overcurrent protector, which automatically interrupt the power supply when detecting even slight imbalances on a circuit. By doing this, it prevents damage to equipment and injury caused by electrocution.

Note

Eaton formerly known as Moeller

Liens connexes

Recently viewed