Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Renesas Electronics
	Product Type	PWM Controller
	Maximum Switching Frequency	500MHz
	Start-up Supply Current	2μA
	Supply Current	80μA
	Output Voltage	5V
	Zero Power Detection	Yes
	Output Current	1.2A
	Number of Outputs	2
	Mount Type	Surface
	Minimum Supply Voltage	3V
	Package Type	DFN
	Pin Count	12
	Maximum Supply Voltage	40V
	Topology	Buck
	Maximum Duty Cycle	50%
	Minimum Operating Temperature	-40°C
	PWM Controller Type	Switching Regulator
	Maximum Operating Temperature	125°C
	Series	ISL8541x
	Height	0.95mm
	Length	4mm
	Standards/Approvals	RoHS
	Width	3mm
	Automotive Standard	No

	Sélectionner tout
	Marque Renesas Electronics
	Product Type PWM Controller
	Maximum Switching Frequency 500MHz
	Start-up Supply Current 2μA
	Supply Current 80μA
	Output Voltage 5V
	Zero Power Detection Yes
	Output Current 1.2A
	Number of Outputs 2
	Mount Type Surface
	Minimum Supply Voltage 3V
	Package Type DFN
	Pin Count 12
	Maximum Supply Voltage 40V
	Topology Buck
	Maximum Duty Cycle 50%
	Minimum Operating Temperature -40°C
	PWM Controller Type Switching Regulator
	Maximum Operating Temperature 125°C
	Series ISL8541x
	Height 0.95mm
	Length 4mm
	Standards/Approvals RoHS
	Width 3mm
	Automotive Standard No

The ISL854102 is a 1.2A synchronous buck regulator with an input range of 3V to 40V. It provides an easy-to-use, high efficiency, low BOM count solution for a variety of applications.

The ISL854102 integrates both high-side and low-side NMOS FETs and features a PFM mode for improved efficiency at light loads. This feature can be disabled if a forced PWM mode is needed. The ISL854102 switches at a default frequency of 500kHz, however, it can also be programmed using an external resistor from 300kHz to 2MHz. The ISL854102 has the ability to use internal or external compensation. By integrating both NMOS devices and providing internal configuration options, minimal external components are required, which reduces the BOM count and design complexity.

With a wide VIN range and reduced BOM, the ISL854102 provides an easy to implement design solution for a variety of applications while giving superior performance. The ISL854102 provides a very robust design for high-voltage industrial applications and an efficient solution for battery powered applications.

Renesas Electronics 12-Pin, DFN ISL854102FRZ-T7A 2-Channel PWM Controller, 500 MHz, 40V, Surface Zero Power Detection

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.