Fluke i400 Current Clamp, AC Adapter, 400 A ac AC Max, Current Output
- N° de stock RS:
- 520-2532
- Numéro d'article Distrelec:
- 176-12-427
- Référence fabricant:
- Fluke i400
- Fabricant:
- Fluke
Sous-total (1 unité)*
263,00 €
(TVA exclue)
318,23 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s)
- Plus 13 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 263,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 520-2532
- Numéro d'article Distrelec:
- 176-12-427
- Référence fabricant:
- Fluke i400
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Adapter Type | AC | |
| Product Type | Current Clamp | |
| Maximum AC Current | 400A ac | |
| Accuracy | 2% + 0.06 A, 45 Hz to 400 Hz | |
| Maximum Conductor Size | 32mm | |
| Output Type | Current | |
| Cable Length | 1.5m | |
| Connector Type | Banana Jack | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | No | |
| Model Number | i400 | |
| Safety Category Voltage | 1000V | |
| Safety Category Level | CAT IV, CAT III | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Adapter Type AC | ||
Product Type Current Clamp | ||
Maximum AC Current 400A ac | ||
Accuracy 2% + 0.06 A, 45 Hz to 400 Hz | ||
Maximum Conductor Size 32mm | ||
Output Type Current | ||
Cable Length 1.5m | ||
Connector Type Banana Jack | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals No | ||
Model Number i400 | ||
Safety Category Voltage 1000V | ||
Safety Category Level CAT IV, CAT III | ||
Statut RoHS : Exempté
- Pays d'origine :
- TW
Fluke Current Clamp, 400A Maximum AC Current, 32mm Maximum Conductor Size - Fluke i400
This current clamp is a Compact AC clamp designed to work with digital multimeters to measure alternating current without interrupting circuits. It delivers an output proportional to measured current for straightforward interfacing with meters and is intended for use in demanding electrical environments where high safety ratings are required.
Features & Benefits
• Measures up to 400A while allowing continuous operation at working currents
• Output of 1mA per amp makes meter readings direct and simple
• Basic accuracy of 2% Plus 0.06A supports precise diagnostics
• Usable across 5Hz–20kHz to capture a wide range of AC waveforms
• Shrouded banana jack and 1.5m cable enable safe, flexible connections
• Rated for CATIII1000V and CATIV600V for high-voltage onsite tasks
• Output of 1mA per amp makes meter readings direct and simple
• Basic accuracy of 2% Plus 0.06A supports precise diagnostics
• Usable across 5Hz–20kHz to capture a wide range of AC waveforms
• Shrouded banana jack and 1.5m cable enable safe, flexible connections
• Rated for CATIII1000V and CATIV600V for high-voltage onsite tasks
Applications
• Suitable for plant maintenance teams performing load analysis
• Ideal for electrical contractors testing distribution circuits
• Used with multimeters for fault-finding in automation systems
• Can be used for current checks on motor control panels
• Used for monitoring current on busbars up to 32mm diameter
• Ideal for electrical contractors testing distribution circuits
• Used with multimeters for fault-finding in automation systems
• Can be used for current checks on motor control panels
• Used for monitoring current on busbars up to 32mm diameter
What conductor sizes can it clamp around?
It accepts conductors up to 32mm diameter and accommodates large busbar sizes specified as 750MCM.
How does it behave at temperatures encountered on site?
It is rated to operate safely between 0°C and 50°C for typical ambient working conditions.
What is the maximum non-destructive current it can withstand?
The device can tolerate short-term currents up to 1000A without permanent damage.
How low a current can it reliably detect?
The lowest measurable current is 1A, suitable for detecting light loads and standby currents.
Liens connexes
- Fluke i400 Current Clamp 400 A ac AC Max, Current Output
- Fluke i400s Current Clamp, 400 A ac AC Max
- Fluke I410 Current Clamp AC/DC Adapter Voltage Output
- Fluke I800 Current Clamp 800 A ac AC Max, Current Output
- Fluke I200 Current Clamp 240 A ac AC Max, Current Output
- Fluke I30 Current Clamp AC/DC Adapter Current Output
- Fluke I3000 FLEX Current Clamp 3000 A ac AC Max, Current Output
- Fluke I200S Current Clamp 240 A ac AC Max, Voltage Output