Références fabricant

Smartscan MFU, 24V dc Safety Relay, 2 Safety Contacts

N° de stock RS:: 382-2055
Référence fabricant:: 011-160
Fabricant:: Smartscan

Smartscan MFU, 24V dc Safety Relay, 2 Safety Contacts

Sous-total (1 unité)*

323,71 €

(TVA exclue)

391,69 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 4 unité(s) expédiée(s) à partir du 22 avril 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	323,71 €

*Prix donné à titre indicatif

N° de stock RS:: 382-2055
Référence fabricant:: 011-160
Fabricant:: Smartscan

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Smartscan
	Product Type	Safety Relay
	Safety Contacts	2
	Reset Method	Automatic
	Mount Type	DIN Rail
	Series	MFU
	Terminal Type	Screw
	IP Rating	IP40
	Minimum Operating Temperature	0°C
	Switching DC Voltage	24V dc
	Standards/Approvals	ISO13850, EN60947-5-1, EN60947-5-5, ISO13849-1
	Maximum Operating Temperature	50°C
	Width	70mm
	Length	90mm
	Height	60mm
	Safety Category	PLe/Category 4 EN ISO 13849-1
	Hazardous Area Certification	IECEx, ATEX
	Coil Voltage	24V dc

	Sélectionner tout
	Marque Smartscan
	Product Type Safety Relay
	Safety Contacts 2
	Reset Method Automatic
	Mount Type DIN Rail
	Series MFU
	Terminal Type Screw
	IP Rating IP40
	Minimum Operating Temperature 0°C
	Switching DC Voltage 24V dc
	Standards/Approvals ISO13850, EN60947-5-1, EN60947-5-5, ISO13849-1
	Maximum Operating Temperature 50°C
	Width 70mm
	Length 90mm
	Height 60mm
	Safety Category PLe/Category 4 EN ISO 13849-1
	Hazardous Area Certification IECEx, ATEX
	Coil Voltage 24V dc

Statut RoHS : Exempté

Pays d'origine :: GB

Smartscan MFU Type 011160

The MFU Type 011160 from Smartscan offers you a reliable, smart and affordable safety relay. The type 011160 can be used in conjunction with the range of 1000 PLUS series safety light curtains with ease as they are highly compatible with each other.

What are some of the features?

• Two dual safety inputs allowing you to connect up to 2 light curtains at any given time.

• A dual input is part of the functionality of the 011160, which allows you to connect your emergency stop circuits as part of your relay.

• Safety monitoring of the output relays is easily distinguishable as the easy to read LED indicators (see below for differences in indication statuses) allow you to track all the inputs and outputs.

• A reset function allowing you to manually override the relay whenever needed.

• External Device Monitoring (EDM) allowing you the ease of access to tracking any other devices on your relay

• DIN Rail mounting to an enclosure of 70mm

• Automatic self-testing will run routines to check its own functionality is working as intended.

• Simultaneous monitoring between all related channels in association with the relay

Safety indication status:

• Inputs Green LED on = Input on

• Outputs Green LED on = Output on

• Reset Yellow LED on = Reset input on

• Reset Yellow LED on (Continuously) = Auto reset mode

• EDM Yellow LED on = EDM inputs on

• Status Red LEDs on (steady) = System ok

• Status Red LEDs on (flashing) = System lockout

Safety outputs:

• 2 x Fail-safe change over contacts, each with a 250V AC, 4A rating
• The multifunction safety relay unit 011149 has passed Type Examination from European Notified Body, SAFENET to the Machinery Directive. This type of certification should provide you with the assurance that this safety relay meets all the relevant safety regulations and requirements expected of such a type of product.

Warning

These devices must be installed and used in accordance with the installation and operating instructions supplied with each product

Standards

EN61496-1 Type 2, and IEC 61496-2-Type 2 and safety classification EN954-1 Category 3