Honeywell Technologies SSCMANV030PAAA5 Piezoresistive Pressure SensorSurface 8 SMT
- N° de stock RS:
- 226-9776
- Référence fabricant:
- SSCMANV030PAAA5
- Fabricant:
- Honeywell
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 226-9776
- Référence fabricant:
- SSCMANV030PAAA5
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Piezoresistive Pressure Sensor | |
| Maximum Overload Pressure | 413kPa | |
| Sensor Type | Piezoresistive Pressure Sensor | |
| Mount Type | Surface | |
| Package Type | SMT | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 206 kPa | |
| Port Type | Single Axial Barbed | |
| Maximum Supply Voltage | 5V | |
| Accuracy | ±0.25 % | |
| Maximum Operating Temperature | 85°C | |
| Length | 10mm | |
| Series | SSC | |
| Standards/Approvals | No | |
| Height | 13.75mm | |
| Minimum Operating Pressure | 0psi | |
| Automotive Standard | No | |
| Minimum Operating Temperature | -40°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Piezoresistive Pressure Sensor | ||
Maximum Overload Pressure 413kPa | ||
Sensor Type Piezoresistive Pressure Sensor | ||
Mount Type Surface | ||
Package Type SMT | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 206 kPa | ||
Port Type Single Axial Barbed | ||
Maximum Supply Voltage 5V | ||
Accuracy ±0.25 % | ||
Maximum Operating Temperature 85°C | ||
Length 10mm | ||
Series SSC | ||
Standards/Approvals No | ||
Height 13.75mm | ||
Minimum Operating Pressure 0psi | ||
Automotive Standard No | ||
Minimum Operating Temperature -40°C | ||
The Honeywell SSC series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. The SSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non linearity using an on board Application Specific Integrated Circuit that is ASIC.
Avoids additional customer calibration
Helps to improve system efficiency
Promotes system reliability and reduces potential system downtime
Detects most internal failures including burst sensors
Enables extended battery life.
Liens connexes
- Honeywell Technologies Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies HSCMAND001BAAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMRRV100MGAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMANV150PGAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMRRD010MDAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMANV015PAAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies HSCMRRN001ND2A3 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies HSCMRRD006MG2A3 Piezoresistive Pressure SensorSurface 8 SMT