Honeywell HSCSAAN010NDAA5 Piezoresistive Pressure SensorThrough Hole 8 SIP
- N° de stock RS:
- 226-9701
- Référence fabricant:
- HSCSAAN010NDAA5
- Fabricant:
- Honeywell
Offre groupée disponible
Sous-total (1 unité)*
49,71 €
(TVA exclue)
60,15 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 95 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 49,71 € |
| 10 - 24 | 48,40 € |
| 25 - 49 | 47,15 € |
| 50 + | 45,97 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 226-9701
- Référence fabricant:
- HSCSAAN010NDAA5
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Sensor Type | Piezoresistive Pressure Sensor | |
| Product Type | Piezoresistive Pressure Sensor | |
| Maximum Overload Pressure | 3.43kPa | |
| Mount Type | Through Hole | |
| Package Type | SIP | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 0.09 kPa | |
| Maximum Supply Voltage | 5V | |
| Accuracy | ±0.25 % | |
| Port Type | Dual Axial Barbed | |
| Maximum Operating Temperature | 85°C | |
| Width | 13.3 mm | |
| Height | 13.75mm | |
| Length | 10mm | |
| Series | HSC | |
| Standards/Approvals | No | |
| Minimum Operating Pressure | -10in/H2O | |
| Minimum Operating Temperature | -20°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Sensor Type Piezoresistive Pressure Sensor | ||
Product Type Piezoresistive Pressure Sensor | ||
Maximum Overload Pressure 3.43kPa | ||
Mount Type Through Hole | ||
Package Type SIP | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 0.09 kPa | ||
Maximum Supply Voltage 5V | ||
Accuracy ±0.25 % | ||
Port Type Dual Axial Barbed | ||
Maximum Operating Temperature 85°C | ||
Width 13.3 mm | ||
Height 13.75mm | ||
Length 10mm | ||
Series HSC | ||
Standards/Approvals No | ||
Minimum Operating Pressure -10in/H2O | ||
Minimum Operating Temperature -20°C | ||
Automotive Standard No | ||
The Honeywell HSC series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non linearity using an on board Application Specific Integrated Circuit. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.
Promotes system reliability and reduces potential system downtime
Allows ultra low pressure sensors to be used continuously well above the calibrated pressure range
Detects most internal failures including burst sensors
Enables extended battery life
Liens connexes
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 3.43kPa Overload Max, SIP
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 3.43kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 206kPa Overload Max, SIP
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 2.64kPa Overload Max, SIP
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 206kPa Overload Max, SIP
- Honeywell Piezoresistive Pressure Sensor Surface Mount 17bar Overload Max, LLSMT
- Honeywell Piezoresistive Pressure Sensor Surface Mount 85kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor Surface Mount 2.64kPa Overload Max, SMT