Honeywell Technologies HSCDANN015PA2A3 Absolute Pressure SensorBoard 8 DIP

N° de stock RS:: 214-1439
Numéro d'article Distrelec:: 304-56-874
Référence fabricant:: HSCDANN015PA2A3
Fabricant:: Honeywell

Honeywell Technologies HSCDANN015PA2A3 Absolute Pressure SensorBoard 8 DIP

Sous-total (1 boîte de 50 unités)*

2 391,00 €

(TVA exclue)

2 893,00 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

Expédition à partir du 07 décembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	La Boite*
50 +	47,82 €	2 391,00 €

*Prix donné à titre indicatif

N° de stock RS:: 214-1439
Numéro d'article Distrelec:: 304-56-874
Référence fabricant:: HSCDANN015PA2A3
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Maximum Overload Pressure	30psi
	Product Type	Absolute Pressure Sensor
	Sensor Type	Absolute Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	15 psi
	Maximum Supply Voltage	6V
	Accuracy	±0.25 %
	Port Type	Single Axial Barbed
	Maximum Operating Temperature	85°C
	Standards/Approvals	ISO 9001
	Width	13.3mm
	Series	HSC
	Height	13.75mm
	Length	10mm
	Minimum Operating Pressure	0psi
	Automotive Standard	ISO 9001
	Minimum Operating Temperature	-40°C

	Sélectionner tout
	Marque Honeywell
	Maximum Overload Pressure 30psi
	Product Type Absolute Pressure Sensor
	Sensor Type Absolute Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 15 psi
	Maximum Supply Voltage 6V
	Accuracy ±0.25 %
	Port Type Single Axial Barbed
	Maximum Operating Temperature 85°C
	Standards/Approvals ISO 9001
	Width 13.3mm
	Series HSC
	Height 13.75mm
	Length 10mm
	Minimum Operating Pressure 0psi
	Automotive Standard ISO 9001
	Minimum Operating Temperature -40°C

Datasheet-HSCDANN015PA2A3

Honeywell HSC Series Absolute Pressure Sensor, 15psi Maximum Operating Pressure, ±0.25% Accuracy - HSCDANN015PA2A3

This absolute pressure sensor measures absolute pressure using an internal vacuum reference and provides a calibrated, temperature‑compensated output for use with non‑corrosive, non‑ionic gases in board‑mounted electronic systems. It operates from a low‑voltage supply and is intended for miniature applications where an amplified or digital, ratiometric signal is required for integration with microcontrollers and data acquisition hardware.

Features and Benefits:

• ±0.25% accuracy reduces software correction requirements
• 3.3V supply compatibility enables low‑voltage system integration
• 8‑pin DIP package allows straightforward through‑hole mounting
• Calibrated and temperature compensated for 0°C-50°C operation
• Single axial barbed port simplifies pneumatic connection to tubing
• Low power consumption (<10mW typical) supports battery operation

Applications

• Suitable for ventilator and respiratory monitoring systems
• Ideal for HVAC filter clog detection and VAV control
• Used with gas chromatography and flow instrumentation
• Can be used for oxygen concentrator pressure monitoring
• Suitable for barometry and ambient absolute pressure measurement

What supply voltages can it accept?

It is characterised for use from a single supply of either 3.3V or 5.0V and will operate within specified limits up to 6V.

What environmental temperature range does it tolerate during operation?

The device will operate over −40 to 85°C and is characterised for compensated performance across 0°C to 50°C.

Which output interfaces are available for direct microcontroller connection?

Outputs include a ratiometric analogue signal or digital interfaces compatible with I2C or SPI allowing direct microprocessor interfacing.

How is long‑term accuracy and interchangeability achieved?

Each sensor is fully calibrated and compensated on‑board using an ASIC, providing tight part‑to‑part accuracy and industry‑leading stability.

What media are permitted at the pressure port?

It is intended for non‑corrosive, non‑ionic gases, liquid‑media options are restricted to specific pressure ranges and require Port 1 only.