Honeywell Technologies HSCDRRD005NDAA5 Pressure SensorBoard 6 DIP

N° de stock RS:: 203-6342
Référence fabricant:: HSCDRRD005NDAA5
Fabricant:: Honeywell

Honeywell Technologies HSCDRRD005NDAA5 Pressure SensorBoard 6 DIP

Sous-total (50 unités, dans un pack de 50)*

2 352,95 €

(TVA exclue)

2 847,05 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

50 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	le paquet*
50 +	47,059 €	2 352,95 €

*Prix donné à titre indicatif

N° de stock RS:: 203-6342
Référence fabricant:: HSCDRRD005NDAA5
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Pressure Sensor
	Maximum Overload Pressure	2068kPa
	Mount Type	Board
	Package Type	DIP
	Pin Count	6
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	34.5 kPa
	Accuracy	±0.25 %
	Maximum Supply Voltage	5V
	Port Type	Dual Radial Barbed
	Maximum Operating Temperature	+85°C
	Length	10mm
	Height	13.75mm
	Series	HSC
	Standards/Approvals	ISO 9001
	Width	13.3mm
	Minimum Operating Pressure	-5in/H2O
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	Sélectionner tout
	Marque Honeywell
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Pressure Sensor
	Maximum Overload Pressure 2068kPa
	Mount Type Board
	Package Type DIP
	Pin Count 6
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 34.5 kPa
	Accuracy ±0.25 %
	Maximum Supply Voltage 5V
	Port Type Dual Radial Barbed
	Maximum Operating Temperature +85°C
	Length 10mm
	Height 13.75mm
	Series HSC
	Standards/Approvals ISO 9001
	Width 13.3mm
	Minimum Operating Pressure -5in/H2O
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCDRRD005NDAA5

Pays d'origine :: CN

Honeywell HSC Series Differential Pressure Sensor, 3.3V Minimum Supply Voltage, ±0.25% Accuracy - HSCDRRD005NDAA5

This differential pressure sensor measures pressure differences between two ports and provides a ratiometric analogue or digital output for use with dry, non-corrosive gases. It is designed for board-mount applications and is temperature-compensated with on-board signal conditioning to deliver calibrated pressure readings across a defined operating range. The device suits low-pressure measurement tasks where precise, Rapid updates and Compact mounting are required.

Features and Benefits:

• ±0.25% full-scale accuracy reduces calibration needs
• Operates from a single 3.3V or 5.0V supply for easy integration
• Compensated over 0°C to 50°C for stable pressure output
• Output update rates near 1kHz analogue and 2kHz digital improve responsiveness
• Low power consumption under 10mW supports battery applications
• Dual radial barbed ports permit straightforward fluidic connections

Applications

• Suitable for HVAC differential pressure monitoring and filter detection
• Ideal for medical respiratory flow and ventilator systems
• Used with flow instrumentation and gas chromatography equipment
• Can be used for barometry and environmental air-quality sensing
• Suitable for pneumatic control and VAV building-management systems

What media may be measured with this sensor?

It is intended for non-corrosive, non-ionic gases such as Air and other dry gases, liquid-media options exist for ranges above 40mbar but must be applied only to Port 1.

What supply and Interface options are available?

The device is compatible with either a 3.3V or 5.0V single supply and offers ratiometric analogue output or 12 to 14-bit digital outputs via I2C or SPI, depending on configuration.

How does it cope with mechanical stress or soldering processes?

It meets IPC/JEDEC J-STD-020E moisture sensitivity level 1 for reflow and withstands high overpressure and burst pressures specified per range.

What environmental operating limits apply?

The operating temperature extends from -20°C to 85°C, and storage limits include -40°C to 85°C, humidity limits depend on media option, with gas-only versions rated to 0-95% RH non-condensing.

How many pins and what package types are offered?

The module is available in a 6-pin board-mount format for DIP packages and in multiple package styles across the family to suit PCB integration.