STMicroelectronics MEMS Pressure SensorSurface 10 HLGA
- N° de stock RS:
- 110-6550P
- Référence fabricant:
- LPS25HBTR
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Sous-total 4 unités (conditionné en bande continue)*
11,46 €
(TVA exclue)
13,868 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
En stock
- Plus 4 572 unité(s) expédiée(s) à partir du 31 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 4 + | 2,865 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 110-6550P
- Référence fabricant:
- LPS25HBTR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Maximum Overload Pressure | 2000kPa | |
| Product Type | MEMS Pressure Sensor | |
| Sensor Type | Absolute Pressure Sensor | |
| Mount Type | Surface | |
| Package Type | HLGA | |
| Pin Count | 10 | |
| Minimum Supply Voltage | 1.7V | |
| Maximum Operating Pressure | 126 kPa | |
| Accuracy | ±0.1 hPa | |
| Maximum Supply Voltage | 3.6V | |
| Maximum Operating Temperature | 105°C | |
| Maximum Output Voltage | 6.7V | |
| Series | LPS25HBTR | |
| Standards/Approvals | No | |
| Length | 2mm | |
| Height | 0.8mm | |
| Minimum Operating Pressure | 26kPa | |
| Automotive Standard | No | |
| Minimum Output Voltage | 5.7V | |
| Minimum Operating Temperature | -30°C | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Maximum Overload Pressure 2000kPa | ||
Product Type MEMS Pressure Sensor | ||
Sensor Type Absolute Pressure Sensor | ||
Mount Type Surface | ||
Package Type HLGA | ||
Pin Count 10 | ||
Minimum Supply Voltage 1.7V | ||
Maximum Operating Pressure 126 kPa | ||
Accuracy ±0.1 hPa | ||
Maximum Supply Voltage 3.6V | ||
Maximum Operating Temperature 105°C | ||
Maximum Output Voltage 6.7V | ||
Series LPS25HBTR | ||
Standards/Approvals No | ||
Length 2mm | ||
Height 0.8mm | ||
Minimum Operating Pressure 26kPa | ||
Automotive Standard No | ||
Minimum Output Voltage 5.7V | ||
Minimum Operating Temperature -30°C | ||
MEMS Pressure Sensor: Digital Barometer, STMicroelectronics
This is an ultra-compact absolute piezo-resistive pressure sensor with a high-resolution sensing element and embedded temperature compensation. Digital pressure, temperature data and register control communication is through the SPI and I²C interfaces. The pressure sensors are designed with “ST’s VENSENS technology” allowing the fabrication of pressure sensor on a monolithic silicon chip. This will eliminate wafer-to-wafer bonding and maximise reliability.
These pressure sensors use innovative MEMS (Micro Electro-Mechanical Systems) to provide an extremely high pressure resolution in an ultra-compact and thin package. Pressure sensors are becoming increasingly used in tablets, smartphones, and wearable technology. With them becoming increasingly popular in smartphones, it opens the door to new applications such as weather analysers, health and sports monitors.
• Key technical features –
• Enhanced temperature compensation
• Absolute pressure range from 260 to 1260 hPa
• Lower power consumption, less the 4μA
• Pressure noise lower than 1Pa RMS
• Embedded FIFO