Fluke 718 -12psi to 100psi Pressure Calibrator - With RS Calibration

This pressure calibrator is an intrinsically safe, battery-powered handheld instrument designed for pressure and loop current checks in hazardous environments. It integrates a manual pressure/vacuum pump and an internal sensor for precise field measurements, while offering compatibility with intrinsically safe pressure modules for extended ranges.

• ±0.05% full-scale pressure measurement for accurate calibration
• 0.01psi resolution enabling fine differential readings
• 0mA–24mA current measurement with 0.001mA resolution for loop checks
• ATEX II 1G Ex ia IIC T4 certification for use in explosive atmospheres
• 20h alkaline battery life for extended field operation
• Built-in vernier pump and bleed valve for controlled pressure application

• Suitable for commissioning and verification of process transmitters in hazardous zones
• Ideal for pressure switch testing and adjustment on site
• Used with intrinsically safe pressure modules to extend measurement to 3000psi
• Can be used for routine loop checks and maintenance of 4–20mA systems

The internal sensor covers −12psi to 100psi with specified accuracy and resolution.

Pressure modules attach via a dedicated LEMO connector and the instrument auto-selects the module readout.

Current connects to shrouded banana jacks and pressure uses a 1/8in NPT fitting.

Temperature coefficients add up to +0.01% of range per °C outside the 18°C–28°C reference for pressure and specified coefficients for current.

II 2 G EEx ib IIC T4

protective red holster, TL75 test leads, AC72 test clips, media filter, CD instruction manual & content control diagram.