Fluke 719P-30G/KIT -0.8 bar to 2 bar Pressure Calibrator, RSCAL

This pressure calibrator is a portable handheld instrument designed for field calibration and testing of transmitters, switches and gauges, providing both pressure generation and loop calibration functions. It operates from battery power and presents measurements on a large backlit display, allowing users to source, simulate and measure mA signals while also offering temperature measurement capability via an optional RTD probe. The unit supports negative pressure measurement down to -0.8 bar and delivers traceable calibration documentation.

• 0.0001 bar resolution delivers fine pressure adjustment and repeatable results
• 0.0001 bar accuracy supports reference-class transmitter calibration
• Programmemable pump limits prevent over-pressurisation during setup
• Integrated electric pump enables one-handed pressure generation up to 20 bar
• Current loop measurement allows sourcing and measuring of 0-24 mA signals
• Battery powered using AA alkaline cells for field portability

• Suitable for calibrating high-accuracy pressure transmitters on-site
• Used for functional testing of pressure switches in maintenance rounds
• Ideal for pressure gauge verification in plant inspection tasks
• Can be used for leak testing procedures with non-corrosive gases
• Used with optional RTD probe for combined temperature verification

The instrument accepts a 1/8 in female NPT pressure connection for field hoses and adapters.

Add ±0.002% of full scale per °C for operation outside 15 °C to 35 °C when assessing measurement uncertainty.

It requires eight AA alkaline batteries and provides a minimum of 1000 pump cycles to 30 psi, 300 cycles to 150 psi and 100 cycles to 300 psi depending on range.

Pressure measurement is limited to dry Air and non-corrosive gases when using the internal sensor.

The mA source supports a maximum 1000 Ω load and the mA simulate function must not exceed 26 V dc.