Infineon Power Switch IC 24-Pin, PG-TSDSO-24
- N° de stock RS:
- 244-2895
- Référence fabricant:
- TLE75602ESHXUMA1
- Fabricant:
- Infineon
Sous-total (1 bobine de 3000 unités)*
3 894,00 €
(TVA exclue)
4 713,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 1,298 € | 3 894,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 244-2895
- Référence fabricant:
- TLE75602ESHXUMA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | Power Switch IC | |
| Switch On Resistance RdsOn | 2.2Ω | |
| Interface Type | Serial | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 3V | |
| Package Type | PG-TSDSO-24 | |
| Pin Count | 24 | |
| Maximum Supply Voltage | 28V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.15mm | |
| Standards/Approvals | RoHS | |
| Length | 8.65mm | |
| Automotive Standard | AEC-Q100, AEC-Q11, AEC-Q2 | |
| Series | TLE75602-ESH | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type Power Switch IC | ||
Switch On Resistance RdsOn 2.2Ω | ||
Interface Type Serial | ||
Mount Type Surface | ||
Minimum Supply Voltage 3V | ||
Package Type PG-TSDSO-24 | ||
Pin Count 24 | ||
Maximum Supply Voltage 28V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1.15mm | ||
Standards/Approvals RoHS | ||
Length 8.65mm | ||
Automotive Standard AEC-Q100, AEC-Q11, AEC-Q2 | ||
Series TLE75602-ESH | ||
The Infineon TLE75602ESHXUMA1 is specially designed to control relays and LEDs in automotive and industrial applications. A serial peripheral Interface (SPI) is utilized for control and diagnosis of the loads as well as of the device. For direct control and PWM there are two input pins available connected to two outputs by default. Additional or different outputs can be controlled by the same input pins (programmable via SPI).
16-bit serial peripheral Interface for control and diagnosis
Daisy Chain capability SPI also compatible with 8-bit SPI devices
2 CMOS compatible parallel input pins with Input Mapping functionality
Cranking capability down to VS = 3.0 V (supports LV124)
Digital supply voltage range compatible with 3.3 V and 5 V microcontrollers
Bulb Inrush Mode (BIM) to drive 2 W lamps and electronic loads
Two internal PWM Generators for μC offload
Very low quiescent current (with usage of IDLE pin)