Infineon Low Side Power Switch IC 24-Pin, PG-TSDSO-24
- N° de stock RS:
- 244-2892
- Référence fabricant:
- TLE75008ESDXUMA1
- Fabricant:
- Infineon
Sous-total (1 bobine de 3000 unités)*
2 061,00 €
(TVA exclue)
2 493,00 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,687 € | 2 061,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 244-2892
- Référence fabricant:
- TLE75008ESDXUMA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | Power Switch IC | |
| Power Switch Topology | Low Side | |
| Switch On Resistance RdsOn | 2.2Ω | |
| Interface Type | Serial | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 3V | |
| Package Type | PG-TSDSO-24 | |
| Pin Count | 24 | |
| Maximum Supply Voltage | 28V | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -40°C | |
| Length | 8.65mm | |
| Height | 0.95mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | AEC-Q2, AEC-Q100, AEC-Q11 | |
| Series | TLE75008-ESD | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type Power Switch IC | ||
Power Switch Topology Low Side | ||
Switch On Resistance RdsOn 2.2Ω | ||
Interface Type Serial | ||
Mount Type Surface | ||
Minimum Supply Voltage 3V | ||
Package Type PG-TSDSO-24 | ||
Pin Count 24 | ||
Maximum Supply Voltage 28V | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -40°C | ||
Length 8.65mm | ||
Height 0.95mm | ||
Standards/Approvals RoHS | ||
Automotive Standard AEC-Q2, AEC-Q100, AEC-Q11 | ||
Series TLE75008-ESD | ||
The Infineon TLE75008ESDXUMA1 is an eight channel low-side power switch in PG-TSDSO-24 package providing embedded protective functions. It is specially designed to control relays and LEDs in automotive and industrial applications. A serial peripheral interface (SPI) is utilized for control and diagnosis of the loads as well as of the device. Fordirect control and PWM there are two input pins available connected to two outputs by default. Additional ordifferent outputs can be controlled by the same input pins (pr ogrammable via SPI).
16-bit serial peripheral interface for control and diagnosis
Daisy Chain capability SPI also compatible with 8-bit SPI devices
2 CMOS compatible parallel input pins with Input Mapping functionality
Cranking capability down to VS = 3.0 V (supports LV124)
Digital supply voltage range compatible with 3.3 V and 5 V microcontrollers
Very low quiescent current (with usage of IDLE pin)
Limp Home mode (with usage of IDLE and IN pins)
Green Product (RoHS compliant)
AEC Qualified
Liens connexes
- Infineon TLE75008ESDXUMA1 Low Side Power Switch IC 24-Pin, PG-TSDSO-24
- Infineon High Side 3 Power Switch IC 24-Pin, PG-TSDSO-24
- Infineon BTT62004ESAXUMA1 High Side 3 Power Switch IC 24-Pin, PG-TSDSO-24
- Infineon BTG70020A1ESWXUMA1 High Side PG-TSDSO-24
- Infineon BTG70013A1ESWXUMA1 High Side PG-TSDSO-24
- Infineon Power Switch IC 24-Pin, PG-TSDSO-24
- Infineon TLE75602ESHXUMA1 Power Switch IC 24-Pin, PG-TSDSO-24
- Infineon High Side PG-TSDSO-14