onsemi FPF2260ATMX Low Side 2, Low Side Power Switch IC 12-Pin, X2-DFN
- N° de stock RS:
- 205-2401
- Référence fabricant:
- FPF2260ATMX
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 205-2401
- Référence fabricant:
- FPF2260ATMX
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Power Switch Topology | Low Side | |
| Product Type | Power Switch IC | |
| Power Switch Type | Low Side | |
| Number of Outputs | 2 | |
| Number of Inputs | 2 | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2.8V | |
| Package Type | X2-DFN | |
| Maximum Supply Voltage | 23V | |
| Pin Count | 12 | |
| Operating Current | 180μA | |
| Maximum Operating Temperature | 85°C | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | ESD Charged Device Model tested per AEC-Q100-011 (EIA/JESD22-C101), ESD Human Body Model tested per AEC-Q100-002 (EIA/JESD22-A114) | |
| Height | 0.75mm | |
| Length | 3mm | |
| Width | 3 mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Power Switch Topology Low Side | ||
Product Type Power Switch IC | ||
Power Switch Type Low Side | ||
Number of Outputs 2 | ||
Number of Inputs 2 | ||
Mount Type Surface | ||
Minimum Supply Voltage 2.8V | ||
Package Type X2-DFN | ||
Maximum Supply Voltage 23V | ||
Pin Count 12 | ||
Operating Current 180μA | ||
Maximum Operating Temperature 85°C | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals ESD Charged Device Model tested per AEC-Q100-011 (EIA/JESD22-C101), ESD Human Body Model tested per AEC-Q100-002 (EIA/JESD22-A114) | ||
Height 0.75mm | ||
Length 3mm | ||
Width 3 mm | ||
Automotive Standard No | ||
The ON Semiconductor OVP and UVLO controller with reverse / negative voltage protection. The device controls and drives a pair of external N-MOSFET that can operate over an input voltage range of 2.8V to 23V. In that way, with OVP feature implemented, the system can allow huge current as long as the external MOSFET can handle. When the input voltage exceeds the over-voltage threshold or lower than under-voltage threshold, the external FET is turned off immediately to prevent damage to the protected downstream components.
Over-voltage Protection Up to ±28V
Active-high enable pin (EN) for device
Super-fast OVLO response time is typical 150ns
Negative voltage blocking
Short circuit protection and auto-restart
Selectable gate driver voltage
USB OTG support mode
Robust ESD performance
Liens connexes
- onsemi FPF2260ATMX Low Side Power Switch IC 12-Pin, X2QFN12
- onsemi FPF2895UCX Low Side Power Switch IC 24-Pin, WLCSP
- Infineon BTS3028SDRATMA1 Low Side Power Switch IC
- Infineon BSP77E6433HUMA1 Low Side Power Switch IC
- Infineon BTS3104SDLATMA1 Low Side Power Switch IC
- Texas Instruments TS12A4517DBVR Low Side Power Switch IC
- ROHM BV1LA025EFJ-CE2 Low Side Power Switch IC
- ROHM BV1LF080EFJ-CE2 Low Side Power Switch IC 8-Pin, HTSOP-J
