onsemi Low Side 2, Low Side Power Switch IC 12-Pin, X2-DFN
- N° de stock RS:
- 205-2400
- Référence fabricant:
- FPF2260ATMX
- Fabricant:
- onsemi
Sous-total (1 bobine de 5000 unités)*
1 180,00 €
(TVA exclue)
1 430,00 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | la bobine* |
|---|---|---|
| 5000 + | 0,236 € | 1 180,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 205-2400
- Référence fabricant:
- FPF2260ATMX
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Power Switch IC | |
| Power Switch Type | Low Side | |
| Power Switch Topology | Low Side | |
| Number of Inputs | 2 | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2.8V | |
| Package Type | X2-DFN | |
| Pin Count | 12 | |
| Maximum Supply Voltage | 23V | |
| Operating Current | 180μA | |
| Maximum Operating Temperature | 85°C | |
| Minimum Operating Temperature | -40°C | |
| Length | 3mm | |
| Standards/Approvals | ESD Charged Device Model tested per AEC-Q100-011 (EIA/JESD22-C101), ESD Human Body Model tested per AEC-Q100-002 (EIA/JESD22-A114) | |
| Height | 0.75mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Power Switch IC | ||
Power Switch Type Low Side | ||
Power Switch Topology Low Side | ||
Number of Inputs 2 | ||
Mount Type Surface | ||
Minimum Supply Voltage 2.8V | ||
Package Type X2-DFN | ||
Pin Count 12 | ||
Maximum Supply Voltage 23V | ||
Operating Current 180μA | ||
Maximum Operating Temperature 85°C | ||
Minimum Operating Temperature -40°C | ||
Length 3mm | ||
Standards/Approvals ESD Charged Device Model tested per AEC-Q100-011 (EIA/JESD22-C101), ESD Human Body Model tested per AEC-Q100-002 (EIA/JESD22-A114) | ||
Height 0.75mm | ||
Automotive Standard No | ||
The ON Semiconductor OVP and UVLO controller with reverse / negative voltage protection. The device controls and drives a pair of external N-MOSFET that can operate over an input voltage range of 2.8V to 23V. In that way, with OVP feature implemented, the system can allow huge current as long as the external MOSFET can handle. When the input voltage exceeds the over-voltage threshold or lower than under-voltage threshold, the external FET is turned off immediately to prevent damage to the protected downstream components.
Over-voltage Protection Up to ±28V
Active-high enable pin (EN) for device
Super-fast OVLO response time is typical 150ns
Negative voltage blocking
Short circuit protection and auto-restart
Selectable gate driver voltage
USB OTG support mode
Robust ESD performance