onsemi FUSB302BVMPX High Side 1, USB Power Power Switch IC 14-Pin, WQFN
- N° de stock RS:
- 178-4411
- Référence fabricant:
- FUSB302BVMPX
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau en stock, il n'est plus vendu par le fabricant.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
L'unité (sur une bobine de 3000)
1,188 €
(TVA exclue)
1,437 €
(TVA incluse)
- N° de stock RS:
- 178-4411
- Référence fabricant:
- FUSB302BVMPX
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Power Switch IC | |
| Power Switch Type | USB Power | |
| Power Switch Topology | High Side | |
| Number of Outputs | 1 | |
| Number of Inputs | 1 | |
| Interface Type | USB Type C | |
| Mount Type | Surface | |
| Package Type | WQFN | |
| Maximum Supply Voltage | 21V | |
| Pin Count | 14 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 105°C | |
| Length | 2.5mm | |
| Width | 2.5 mm | |
| Standards/Approvals | Pb Free, AECQualified, PPAP capable, Halide Free | |
| Height | 0.72mm | |
| Automotive Standard | AEC-Q100 | |
| Series | FUSB302B | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Power Switch IC | ||
Power Switch Type USB Power | ||
Power Switch Topology High Side | ||
Number of Outputs 1 | ||
Number of Inputs 1 | ||
Interface Type USB Type C | ||
Mount Type Surface | ||
Package Type WQFN | ||
Maximum Supply Voltage 21V | ||
Pin Count 14 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 105°C | ||
Length 2.5mm | ||
Width 2.5 mm | ||
Standards/Approvals Pb Free, AECQualified, PPAP capable, Halide Free | ||
Height 0.72mm | ||
Automotive Standard AEC-Q100 | ||
Series FUSB302B | ||
- Pays d'origine :
- TH
The FUSB302B targets system designers looking to implement a DRP/SRC/SNK USB Type-C connector with low amount of programmability. The FUSB302B enables the USB Type-C detection including attach, and orientation. The FUSB302B integrates the physical layer of the USB BMC Power Delivery protocol to allow up to 100 W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.
Dual-Role Functionality with Autonomous DRP Toggle
Ability to connect as either a host or a device based on what has been attached.
Software configurable either as a dedicated host, dedicated device, or dual role.
Attach/Detach Detection as Host
Current Capability Indication as Host
Current Capability Detection as Device
Audio Adapter Accessory Mode
Debug Accessory Mode
Active Cable Detection