onsemi High Side 1, USB Power Power Switch IC 12-Pin, QFN
- N° de stock RS:
- 178-4287
- Référence fabricant:
- FUSB303TMX
- Fabricant:
- onsemi
Sous-total (1 bobine de 5000 unités)*
810,00 €
(TVA exclue)
980,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Dernier stock RS
- 5 000 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité | la bobine* |
|---|---|---|
| 5000 + | 0,162 € | 810,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 178-4287
- Référence fabricant:
- FUSB303TMX
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Power Switch Topology | High Side | |
| Power Switch Type | USB Power | |
| Product Type | Power Switch IC | |
| Number of Inputs | 1 | |
| Interface Type | I2C, GPIO | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2.85V | |
| Package Type | QFN | |
| Pin Count | 12 | |
| Maximum Supply Voltage | 22V | |
| Maximum Operating Temperature | 85°C | |
| Operating Current | 10μA | |
| Minimum Operating Temperature | -40°C | |
| Height | 0.35mm | |
| Length | 1.65mm | |
| Standards/Approvals | USB Type-C Specification Release 1.3 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Power Switch Topology High Side | ||
Power Switch Type USB Power | ||
Product Type Power Switch IC | ||
Number of Inputs 1 | ||
Interface Type I2C, GPIO | ||
Mount Type Surface | ||
Minimum Supply Voltage 2.85V | ||
Package Type QFN | ||
Pin Count 12 | ||
Maximum Supply Voltage 22V | ||
Maximum Operating Temperature 85°C | ||
Operating Current 10μA | ||
Minimum Operating Temperature -40°C | ||
Height 0.35mm | ||
Length 1.65mm | ||
Standards/Approvals USB Type-C Specification Release 1.3 | ||
Automotive Standard No | ||
The FUSB303 device is a fully autonomous USB Type−C™ controller optimized for 15 W or less applications. The FUSB303 offers CC logic detection for Source Port role, Sink Port role, DRP, and accessory detection support, as well as Dead Battery support as defined in USB−C specifications. The FUSB303 features configurable address I2C access to support multiple ports per system or it can operate autonomously configured by just pins.
Fully Autonomous USB−C™ Port Controller
Supports Latest Type−C™ Specification Release 1.3
Source, Sink, and DRP Port role Configuration with Optional Accessory Support
Try.SRC and Try.SNK modes for Preferring Source Role or Sink Role Respectively
VDD Operating Range, 2.85 V − 5.5 V
Typical Low Power Operation: ICC < 10μA
GPIO and I2C Configuration
Max 28 V DC Tolerance on ID, VBUS_DET, CC1 and CC2
Dead Battery Support (Sink Port role when No Power Applied)
4 kV HBM ESD Protection for Connector Pins