Infineon, PFC Controller 250 kHz 8-Pin, DSO-8 25 V
- N° de stock RS:
- 244-1585
- Référence fabricant:
- ICE2PCS05GXUMA1
- Fabricant:
- Infineon
Sous-total (1 bobine de 2500 unités)*
1 047,50 €
(TVA exclue)
1 267,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 23 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2500 + | 0,419 € | 1 047,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 244-1585
- Référence fabricant:
- ICE2PCS05GXUMA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | PFC Controller | |
| Start-up Supply Current | 450μA | |
| Maximum Source Current | 38μA | |
| Maximum Sink Current | 41μA | |
| Switching Frequency | 250kHz | |
| Supply Current | 1.3mA | |
| Mount Type | Surface | |
| Package Type | DSO-8 | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 25V | |
| Minimum Operating Temperature | -40°C | |
| Height | 1.75mm | |
| Length | 5mm | |
| Standards/Approvals | IEC 1000-3-2 | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type PFC Controller | ||
Start-up Supply Current 450μA | ||
Maximum Source Current 38μA | ||
Maximum Sink Current 41μA | ||
Switching Frequency 250kHz | ||
Supply Current 1.3mA | ||
Mount Type Surface | ||
Package Type DSO-8 | ||
Pin Count 8 | ||
Maximum Supply Voltage 25V | ||
Minimum Operating Temperature -40°C | ||
Height 1.75mm | ||
Length 5mm | ||
Standards/Approvals IEC 1000-3-2 | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
The Infineon Power Factor Correction (PFC) Controller in Continuous Conduction Mode (CCM) is a 8-pins wide input range controller IC for active power factor correction converters. It is designed for converters in boost topology, and requires few external components. Its power supply is recommended to be provided by an external auxiliary supply which will switch on and off the IC.
Average Current Control
Supports Wide Range
Programmable Operating/Switching Frequency
Enhanced Dynamic Response
Open Loop Detection
Output Over-Voltage Protection
Cycle by Cycle Peak Current Limiting
VCC Under-Voltage Lockout