Infineon IDP2308XUMA1, PFC Controller 300 kHz 14-Pin, DSO-14 26 V
- N° de stock RS:
- 273-2747
- Référence fabricant:
- IDP2308XUMA1
- Fabricant:
- Infineon
Sous-total (1 bobine de 2500 unités)*
3 020,00 €
(TVA exclue)
3 655,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 24 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2500 + | 1,208 € | 3 020,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 273-2747
- Référence fabricant:
- IDP2308XUMA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | PFC Controller | |
| Maximum Source Current | 0.52A | |
| Sub Type | Power Factor Controller IC | |
| Maximum Sink Current | 1.3A | |
| Switching Frequency | 300kHz | |
| Package Type | DSO-14 | |
| Pin Count | 14 | |
| Minimum Supply Voltage | 10.5V | |
| Maximum Supply Voltage | 26V | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | RoHS | |
| Series | IDP | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type PFC Controller | ||
Maximum Source Current 0.52A | ||
Sub Type Power Factor Controller IC | ||
Maximum Sink Current 1.3A | ||
Switching Frequency 300kHz | ||
Package Type DSO-14 | ||
Pin Count 14 | ||
Minimum Supply Voltage 10.5V | ||
Maximum Supply Voltage 26V | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals RoHS | ||
Series IDP | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The Infineon Multi mode PFC and LLC controller combined with a floating high side driver and a start up cell. A digital engine provides advanced algorithms for multi mode operation to support highest efficiency over the whole load range. A comprehensive and configurable protection feature set is implemented. Only a minimum of external components are required with the low pin count DSO 14 package. The integrated HV start up cell and advanced burst mode enable to achieve
low stand by power. In addition a one time programming unit is integrated to provide a wide set of configurable parameters that help to ease the design in phase.
Flexible design
Integrated floating driver
Integrated 600V start up cell
Digital multi mode operation
UART interface for communication
Eliminates the auxiliary power supply