onsemi NCP1618CDR2G, Power Factor Controller IC 130 kHz 27-Pin, DIP 9.5 V
- N° de stock RS:
- 233-6819
- Référence fabricant:
- NCP1618CDR2G
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 233-6819
- Référence fabricant:
- NCP1618CDR2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 1.3mA | |
| Maximum Source Current | 500mA | |
| Sub Type | Power Factor Controller | |
| Maximum Sink Current | 800mA | |
| Switching Frequency | 130kHz | |
| Supply Current | 4mA | |
| Zero Power Detection | Yes | |
| Mount Type | Surface | |
| Package Type | DIP | |
| Pin Count | 27 | |
| Minimum Supply Voltage | 9.5V | |
| Maximum Supply Voltage | 9.5V | |
| Minimum Operating Temperature | -40°C | |
| Series | NCP1618C | |
| Length | 5mm | |
| Height | 1.75mm | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 1.3mA | ||
Maximum Source Current 500mA | ||
Sub Type Power Factor Controller | ||
Maximum Sink Current 800mA | ||
Switching Frequency 130kHz | ||
Supply Current 4mA | ||
Zero Power Detection Yes | ||
Mount Type Surface | ||
Package Type DIP | ||
Pin Count 27 | ||
Minimum Supply Voltage 9.5V | ||
Maximum Supply Voltage 9.5V | ||
Minimum Operating Temperature -40°C | ||
Series NCP1618C | ||
Length 5mm | ||
Height 1.75mm | ||
Standards/Approvals No | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The ON Semiconductor NCP1618CDR2G is an innovative multimode power factor controller. The circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line/load range. In very−light−load conditions, the circuit can enter the soft−SKIP mode for minimized losses. Housed in a SO-9 package, the circuit further incorporates the features necessary for robust and compact PFC stages, with few external components
A High-voltage start-up current source for VCC capacitor charge at startup
It has an internal compensation of the regulation loop
It offers Soft and Fast-overvoltage protection
It offers Line-Sag and Brown-out detection