onsemi, Power Factor Correction IC 130 kHz 9-Pin, SOIC 35 V
- N° de stock RS:
- 221-6627
- Référence fabricant:
- NCP1655ADR2G
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 221-6627
- Référence fabricant:
- NCP1655ADR2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Power Factor Correction IC | |
| Maximum Source Current | 500mA | |
| Sub Type | Power Factor Controller | |
| Switching Frequency | 130kHz | |
| Maximum Sink Current | 800mA | |
| Supply Current | 4mA | |
| Zero Power Detection | Yes | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 9 | |
| Minimum Supply Voltage | 9.5V | |
| Maximum Supply Voltage | 35V | |
| Minimum Operating Temperature | -40°C | |
| Height | 1.75mm | |
| Series | NCP1655A | |
| Length | 5mm | |
| Width | 4 mm | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Power Factor Correction IC | ||
Maximum Source Current 500mA | ||
Sub Type Power Factor Controller | ||
Switching Frequency 130kHz | ||
Maximum Sink Current 800mA | ||
Supply Current 4mA | ||
Zero Power Detection Yes | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 9 | ||
Minimum Supply Voltage 9.5V | ||
Maximum Supply Voltage 35V | ||
Minimum Operating Temperature -40°C | ||
Height 1.75mm | ||
Series NCP1655A | ||
Length 5mm | ||
Width 4 mm | ||
Standards/Approvals No | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The ON Semiconductor NCP1655 is an innovative multimode power factor controller. The circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line/load range. In very−light−load conditions, the circuit can enter the soft−SKIP mode for minimized losses.
Fast line / load transient compensation (Dynamic Response Enhancer)
Large VCC operating range (9.5 V to 35 V)
Line range detection