onsemi NIS4461MT3TXG, Power Factor Correction IC 10-Pin, WDFN 24V
- N° de stock RS:
- 221-6687
- Référence fabricant:
- NIS4461MT3TXG
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 221-6687
- Référence fabricant:
- NIS4461MT3TXG
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Power Factor Correction IC | |
| Sub Type | Power Factor Controller | |
| Maximum Sink Current | 25μA | |
| Supply Current | 4.2μA | |
| Zero Power Detection | No | |
| Mount Type | Surface | |
| Package Type | WDFN | |
| Minimum Supply Voltage | 9V | |
| Pin Count | 10 | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Series | NIS4461M | |
| Length | 2.6mm | |
| Height | 800μm | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Power Factor Correction IC | ||
Sub Type Power Factor Controller | ||
Maximum Sink Current 25μA | ||
Supply Current 4.2μA | ||
Zero Power Detection No | ||
Mount Type Surface | ||
Package Type WDFN | ||
Minimum Supply Voltage 9V | ||
Pin Count 10 | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Series NIS4461M | ||
Length 2.6mm | ||
Height 800μm | ||
Standards/Approvals No | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The ON Semiconductor NIS4461 eFuse is a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures. It is designed to protect the downstream circuitry against an overcurrent event by limiting the current while protecting against high inrush current, as well as monitoring the load current in real time.
9 V to 24 V input range
39 m typical
Internal charge pump
Internal under voltage lockout circuit