onsemi, Power Factor Pre-Regulator Circuit IC 20 kHz 27-Pin, SPMIC 253 Vrms
- N° de stock RS:
- 181-1880
- Référence fabricant:
- FPAB20BH60B
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 181-1880
- Référence fabricant:
- FPAB20BH60B
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Power Factor Pre-Regulator Circuit IC | |
| Sub Type | Boost PFC | |
| Maximum Sink Current | 5mA | |
| Switching Frequency | 20kHz | |
| Supply Current | 26mA | |
| Zero Power Detection | No | |
| Mount Type | Through Hole | |
| Package Type | SPMIC | |
| Minimum Supply Voltage | 187Vrms | |
| Pin Count | 27 | |
| Maximum Supply Voltage | 253Vrms | |
| Minimum Operating Temperature | -40°C | |
| Series | SPM 3 | |
| Length | 44.2mm | |
| Width | 27 mm | |
| Height | 5.7mm | |
| Standards/Approvals | UL No. E209204 (UL1557) | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Power Factor Pre-Regulator Circuit IC | ||
Sub Type Boost PFC | ||
Maximum Sink Current 5mA | ||
Switching Frequency 20kHz | ||
Supply Current 26mA | ||
Zero Power Detection No | ||
Mount Type Through Hole | ||
Package Type SPMIC | ||
Minimum Supply Voltage 187Vrms | ||
Pin Count 27 | ||
Maximum Supply Voltage 253Vrms | ||
Minimum Operating Temperature -40°C | ||
Series SPM 3 | ||
Length 44.2mm | ||
Width 27 mm | ||
Height 5.7mm | ||
Standards/Approvals UL No. E209204 (UL1557) | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
- Pays d'origine :
- CN
The FPAB20BH60B is an advanced PFC SPM® 3 module providing a fully-featured, high-performance Boost PFC (Power Factor Correction) input power stage for consumer, medical, and industrial applications. These modules integrate optimized gate drive of the built-in IGBT to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockout, over-current shutdown, thermal monitoring, and fault reporting. These modules also feature a full-wave rectifier, and high-performance output diode for additional space savings and mounting convenience.
600 V - 20 A Single-Phase Boost PFC with Integral Gate Driver and Protection
Very Low Thermal Resistance Using Al2O3 DBC Substrate
Full-Wave Bridge Rectifier and High-Performance Output Diode
Built-in NTC Thermistor for Temperature Monitoring
Optimized for 20kHz Switching Frequency
Isolation Rating: 2500 Vrms/min.
Motion Control - Home Appliance/Industrial Motor