Infineon, Power Factor Controller IC 250 kHz 14-Pin, DSO 25V
- N° de stock RS:
- 110-7782P
- Référence fabricant:
- ICE3PCS01GXUMA1
- Fabricant:
- Infineon
Offre groupée disponible
Consulter les options de prix de grosSous-total 50 unités (conditionné en bande continue)*
51,50 €
(TVA exclue)
62,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 9 030 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 50 - 90 | 1,03 € |
| 100 - 240 | 0,985 € |
| 250 - 490 | 0,92 € |
| 500 + | 0,868 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 110-7782P
- Référence fabricant:
- ICE3PCS01GXUMA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 2.4mA | |
| Maximum Source Current | -6mA | |
| Sub Type | Power Factor Controller | |
| Switching Frequency | 250kHz | |
| Zero Power Detection | No | |
| Mount Type | Surface | |
| Package Type | DSO | |
| Pin Count | 14 | |
| Minimum Supply Voltage | -0.3V | |
| Maximum Supply Voltage | 25V | |
| Minimum Operating Temperature | -40°C | |
| Series | IC | |
| Standards/Approvals | No | |
| Length | 8.75mm | |
| Height | 1.5mm | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 2.4mA | ||
Maximum Source Current -6mA | ||
Sub Type Power Factor Controller | ||
Switching Frequency 250kHz | ||
Zero Power Detection No | ||
Mount Type Surface | ||
Package Type DSO | ||
Pin Count 14 | ||
Minimum Supply Voltage -0.3V | ||
Maximum Supply Voltage 25V | ||
Minimum Operating Temperature -40°C | ||
Series IC | ||
Standards/Approvals No | ||
Length 8.75mm | ||
Height 1.5mm | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
Infineon Series IC Power Factor Controller IC, 250kHz Switching Frequency, 14 Pin Count - ICE3PCS01GXUMA1
This power-factor controller IC is a surface-mount device designed to manage power-factor correction in electronic power supplies. It operates across a wide temperature range and targets industrial applications that require compact PFC control with low quiescent supply demand and defined switching behaviour.
Features and Benefits:
• Low start-up supply current reduces auxiliary power requirements
• Switching-frequency setpoint enables high-speed PFC operation
• Operates from low to high supply voltages, enhancing design headroom
• Negative source-current capability supports specific gate-drive needs
• Wide operating temperature range allows deployment in harsh environments
• Switching-frequency setpoint enables high-speed PFC operation
• Operates from low to high supply voltages, enhancing design headroom
• Negative source-current capability supports specific gate-drive needs
• Wide operating temperature range allows deployment in harsh environments
Applications
• Suitable for industrial power-supply PFC front ends
• Ideal for high-frequency converter designs requiring compact controllers
• Used with surface-mount power stages on dense assemblies
• Can be used for thermally stable systems in elevated-temperature sites
• Ideal for high-frequency converter designs requiring compact controllers
• Used with surface-mount power stages on dense assemblies
• Can be used for thermally stable systems in elevated-temperature sites
What are the device pin count and package type for PCB layout?
It is offered in a 14-pin DSO package intended for surface mounting, facilitating dense PCB layouts.
What supply conditions should the designer consider for start-up?
Designers should allow for a start-up supply current of 2.4 mA when sizing auxiliary power and sequencing circuits.
How does thermal capability affect placement near heat sources?
The component is rated to a maximum operating temperature of 150°C and a minimum of -40°C, so placement close to hot components must respect that upper limit for reliable operation.
What switching characteristic is provided for EMI and filtering planning?
The device uses a switching frequency of 250 kHz, which informs inductor selection and EMI filter design.