Phoenix Contact EMG Signal Conditioning DIN Rail, 2942124
- N° de stock RS:
- 410-4724
- Numéro d'article Distrelec:
- 304-10-464
- Référence fabricant:
- 2942124
- Fabricant:
- Phoenix Contact
Sous-total (1 unité)*
71,86 €
(TVA exclue)
86,95 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 21 unité(s) expédiée(s) à partir du 07 septembre 2026
- Plus 18 unité(s) expédiée(s) à partir du 07 septembre 2026
- Plus 20 unité(s) expédiée(s) à partir du 14 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 71,86 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 410-4724
- Numéro d'article Distrelec:
- 304-10-464
- Référence fabricant:
- 2942124
- Fabricant:
- Phoenix Contact
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Phoenix Contact | |
| Product Type | Signal Conditioning | |
| Mount Type | DIN Rail | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 40°C | |
| Standards/Approvals | GOST | |
| Series | EMG | |
| Sélectionner tout | ||
|---|---|---|
Marque Phoenix Contact | ||
Product Type Signal Conditioning | ||
Mount Type DIN Rail | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 40°C | ||
Standards/Approvals GOST | ||
Series EMG | ||
- Pays d'origine :
- DE
Phoenix Contact Potentiometer, 10kΩ Resistance Value, 0.5W Current Capacity - EMG 30-SP-10K LIN - 2942124
This Phoenix Contact potentiometer is a variable resistor that regulates the current flowing through a circuit. It picks up an input voltage and transfers it, controlling the amount of voltage by the position of the sliding contact wiper. Manually adjust the wiper using the central rotary knob to easily GET the level you need.
The unit's Compact dimensions of 30 (W) x 75 (H) x 68mm (D) make it easy to fit alongside other control modules in your setup. It mounts to a DIN rail assembly via the M3 threaded screw terminals to keep it securely fixed in place. With an operating temperature range between 0°C and +40°C, it's designed for use in moderate conditions.
Use this device to provide reliable electrical resistance to motor speed-controlled devices such as safety doors. Its converting signal conditioner function strengthens a signal transmission for industrial amplification or filtering out electrical noise.
• Robust, fibre-reinforced polycarbonate housing material resists shattering or snapping when subjected to impact
• Green housing for easy identification of your devices on a DIN rail
• Lightweight 53.65g construction puts little strain on its mount
• 10 kΩ resistance level with a ±20% tolerance for a wide load resistance range
EMG 30-SP - setpoint Value potentiometer
The setpoint Value module enables setpoint Values to be defined via standard potentiometers
DIN rail assembly
Liens connexes
- Phoenix Contact EMG Signal Conditioning DIN Rail, 2940252
- Phoenix Contact EMG 30-SPK-10K LIN 10 kΩ Linear Potentiometer DIN Rail, 2942137
- Phoenix Contact EMG Series Relay Module 230V Coil 5mA
- Phoenix Contact EMG Series Relay Module 48V Coil 10mA
- Phoenix Contact EMG Series Relay Module 230V Coil 18mA
- Phoenix Contact EMG Series Relay Module 230V Coil 4.8mA
- Phoenix Contact EMG Series Relay Module 120V Coil 5mA
- Phoenix Contact EMG Series Relay Module 24V Coil 21mA