Parker Pneumatic Timer 8 bar max
- N° de stock RS:
- 410-488
- Référence fabricant:
- PRT-C10
- Fabricant:
- Parker
Offre groupée disponible
Sous-total (1 unité)*
264,77 €
(TVA exclue)
320,37 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 42 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 5 unité(s) expédiée(s) à partir du 24 juillet 2026
- Plus 16 unité(s) expédiée(s) à partir du 14 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 264,77 € |
| 5 + | 256,55 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 410-488
- Référence fabricant:
- PRT-C10
- Fabricant:
- Parker
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Parker | |
| Product Type | Pneumatic Timer | |
| Hazardous Area Certification | EN 50019 dated March 1977 (NFC 23519 dated May 1982), EExe ll T4, Conforming to certificate LCIE 866115X | |
| Minimum Operating Pressure | 3bar | |
| Mount Type | Surface, Flush, DIN Rail, Clip | |
| Maximum Operating Pressure | 8 bar | |
| Minimum Operating Temperature | -15°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | EN 50019 dated March 1977 (NFC 23519 dated May 1982), EN 50014 dated March 1977 (NFC 23514 dated May 1982) | |
| Sélectionner tout | ||
|---|---|---|
Marque Parker | ||
Product Type Pneumatic Timer | ||
Hazardous Area Certification EN 50019 dated March 1977 (NFC 23519 dated May 1982), EExe ll T4, Conforming to certificate LCIE 866115X | ||
Minimum Operating Pressure 3bar | ||
Mount Type Surface, Flush, DIN Rail, Clip | ||
Maximum Operating Pressure 8 bar | ||
Minimum Operating Temperature -15°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals EN 50019 dated March 1977 (NFC 23519 dated May 1982), EN 50014 dated March 1977 (NFC 23514 dated May 1982) | ||
Parker Pneumatic Timer
The Parker PRT series pneumatic time delay relay requires operating pressure ranging between 3bar and 8bar. This OFF delay timer has a timing range from 0.1 seconds to 30 seconds. This timer has maintained input signal during an adjustable time after which a regenerated output appears. It is consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Note:
All the logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing O-rings are in the bottom of each unit.
Features and Benefits
Long life expectancy
Polyamide body material
2 or 3-Port Subbase mount
Response time is 2 millisecond to 3 millisecond
Operating temperature ranging between -15°C and 60°C
Very reliable
Certifications
ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007
Liens connexes
- Parker Pneumatic Timer 8 bar max
- Crouzet Pneumatic Timer Timer Relay 8 bar max
- Crouzet Pneumatic Timer 8 bar max
- Norgren Pneumatic Timer 10 bar max
- Parker PLL series 8 bar Pneumatic Logic Controller with AND function
- Parker PLK series 8 bar Pneumatic Logic Controller with OR function
- Festo Pneumatic Timer 6 bar max
- Parker PLJ series 8 bar Pneumatic Logic Controller with Memory Relay Inhibit NOT