SMC AS Series Speed Controller Speed Controller, 1/2 in G G 1/2 in Threaded 16 mm
- N° de stock RS:
- 815-5331
- Référence fabricant:
- AS4201FS-04-16S
- Fabricant:
- SMC
Visuel non contractuel
Sous-total (1 unité)*
32,62 €
(TVA exclue)
39,47 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 32,62 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 815-5331
- Référence fabricant:
- AS4201FS-04-16S
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Inlet Connection Type | 1/2 in G | |
| Product Type | Speed Controller | |
| Outlet Connection Type | Threaded | |
| Sub Type | Speed Controller | |
| Inlet Connection Size | 1/2 in | |
| Outlet Connection Size | 16 mm | |
| Series | AS | |
| Inlet Thread Standard | G | |
| Maximum Operating Pressure | 1 Mpa | |
| Minimum Operating Temperature | -5°C | |
| Material | Nitrile Rubber (NBR), Steel Wire (Zinc Chromated), POM, Halogenated Nitrile Rubber (HNBR), Brass (Electroless Nickel Plated), Polyphenylene Sulfide, Stainless Steel, Polybutylene Terephthalate | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | ISO 4414, IEC 60204-1, RoHS, ISO 10218-1, ISO 4413 | |
| Hazardous Area Certification | No | |
| Minimum Operating Pressure | 0.1MPa | |
| Proof Pressure | 1.5MPa | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Inlet Connection Type 1/2 in G | ||
Product Type Speed Controller | ||
Outlet Connection Type Threaded | ||
Sub Type Speed Controller | ||
Inlet Connection Size 1/2 in | ||
Outlet Connection Size 16 mm | ||
Series AS | ||
Inlet Thread Standard G | ||
Maximum Operating Pressure 1 Mpa | ||
Minimum Operating Temperature -5°C | ||
Material Nitrile Rubber (NBR), Steel Wire (Zinc Chromated), POM, Halogenated Nitrile Rubber (HNBR), Brass (Electroless Nickel Plated), Polyphenylene Sulfide, Stainless Steel, Polybutylene Terephthalate | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals ISO 4414, IEC 60204-1, RoHS, ISO 10218-1, ISO 4413 | ||
Hazardous Area Certification No | ||
Minimum Operating Pressure 0.1MPa | ||
Proof Pressure 1.5MPa | ||
- Pays d'origine :
- IN
SMC Series AS Speed Controller, 1/2 inches Inlet Connection size, 16mm Outlet Connection size - AS4201FS-04-16S
This speed controller regulates airflow to control actuator velocity in pneumatic systems. Designed for industrial automation contexts, it connects via a 1/2 inches G inlet and delivers controlled flow through a 16mm threaded outlet. Constructed from a combination of polymers, metals and elastomers, it operates within typical shop and factory temperature and pressure ranges.
Features & Benefits
• Maximum operating pressure 1MPa enables robust system performance
• Proof pressure 1.5MPa provides resistance to transient overpressure
• Operating temperature range -5°C to 60°C supports varied environments
• NBR and HNBR Seals reduce Air leakage and chemical wear
• Brass electroless nickel-plated components resist corrosion in pneumatics
• Proof pressure 1.5MPa provides resistance to transient overpressure
• Operating temperature range -5°C to 60°C supports varied environments
• NBR and HNBR Seals reduce Air leakage and chemical wear
• Brass electroless nickel-plated components resist corrosion in pneumatics
**Applications**
• Suitable for flow control on conveyor cylinder speed adjustment
• Ideal for use in pick-and-place actuator timing
• Used with pneumatic grippers to manage closing velocity
• Can be used for cylinder cushioning in assembly machines
• Ideal for use in pick-and-place actuator timing
• Used with pneumatic grippers to manage closing velocity
• Can be used for cylinder cushioning in assembly machines
What connection standards are required for installation?
It requires a 1/2 inches G threaded inlet compatible with G-thread fittings and a 16mm threaded outlet for downstream tubing or fittings.
Which materials contact the pneumatic medium and what are their advantages?
Sealing materials include nitrile and halogenated nitrile rubbers for wear and chemical resistance while internal components use brass, stainless steel and engineered plastics to balance durability and friction control.
What standards does it adhere to for machine safety and electrical considerations?
The unit conforms to recognised industry standards covering pneumatic and electrical safety practices as listed in its technical approvals.
How should the unit be selected for systems with variable pressure?
Choose it where nominal supply does not exceed 1MPa and allow for a 1.5MPa proof pressure margin to accommodate pressure transients.
Liens connexes
- SMC Threaded Series Speed Controller Speed Controller, Threaded G 1/2
- SMC AS Series Speed Controller Speed Controller, 1/2 in G G 1/2 in 12 mm
- SMC AS Series Speed Controller Speed Controller Inlet Male Outlet Female
- SMC AS Series Speed Controller Speed Controller, 1/2 in G G 1/2 in 10 mm
- SMC AS Series Speed Controller Speed Controller Inlet Male Outlet Female Tube
- SMC AS Series Speed Controller Speed Controller Inlet Male Outlet Female Tube
- SMC AS Series Speed Controller
- SMC AS Series Speed Controller Pneumatic Elbow Threaded-to-Tube Adapter, 1/2 in R R 1/2 in One-touch Fitting 12 mm