SKF SY 25 WF Pillow Block Bearing -, 25 mm ID
- N° de stock RS:
- 213-2035
- Référence fabricant:
- SY 25 WF
- Fabricant:
- SKF
Sous-total (1 unité)*
63,40 €
(TVA exclue)
76,71 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 02 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 63,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 213-2035
- Référence fabricant:
- SY 25 WF
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 25mm | |
| Product Type | Pillow Block Bearing | |
| Material | Cast Iron | |
| Static Load Rating | 7.8kN | |
| Centre Height | 36.5mm | |
| Locking Type | Eccentric Locking Collar | |
| Mount Hole Size | 11.5 mm | |
| Length | 160mm | |
| Depth | 36mm | |
| Dynamic Load Rating | 14kN | |
| Mount Hole Centre-to-Centre | 102mm | |
| End Type | Open | |
| Number of Bolts | 2 | |
| Height | 70mm | |
| Series | SY | |
| Bore Type | Cylindrical | |
| Standards/Approvals | No | |
| Limiting Speed | 7000rpm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 25mm | ||
Product Type Pillow Block Bearing | ||
Material Cast Iron | ||
Static Load Rating 7.8kN | ||
Centre Height 36.5mm | ||
Locking Type Eccentric Locking Collar | ||
Mount Hole Size 11.5 mm | ||
Length 160mm | ||
Depth 36mm | ||
Dynamic Load Rating 14kN | ||
Mount Hole Centre-to-Centre 102mm | ||
End Type Open | ||
Number of Bolts 2 | ||
Height 70mm | ||
Series SY | ||
Bore Type Cylindrical | ||
Standards/Approvals No | ||
Limiting Speed 7000rpm | ||
- Pays d'origine :
- IT
SKF Pillow Block Bearing, 25mm ID, 36.5mm Centre Height - SY 25 WF
Looking for a reliable way to mount your industrial shaft? This pillow block bearing from SKF has the job in hand. There are two predrilled bolt holes you can use to mount it on a flat surface. All you need is fasteners with a 10mm diameter. To complete the setup, just slip a 25mm-wide shaft through the unit's inner ring. This part is made from durable cast iron, so it takes the pressure of tough environments in its stride.
Features & Benefits
• Cast-iron housing is impact-resistant, so it takes the knocks you'd expect in an industrial setting
• Can be relubricated to limit friction, minimise wear and ensure a long service life
• Sealed bearing type offers protection against contaminants
Applications
• Construction plants
• Conveyor belts
• Agricultural equipment
What's the load rating of this unit?
This unit can withstand 7.8kN when stationary and 14kN when moving, so it's suitable for heavy-duty applications.
Can I use this unit in humid work areas?
Yes, you can. This pillow block bearing is made from cast iron, which is corrosion-resistant for use in areas with high levels of water vapour.
Liens connexes
- SKF SY 60 WF Pillow Block Bearing -, 60 mm ID
- SKF SY 25 FM Pillow Block Bearing -, 25 mm ID
- SKF SY 25 TR Pillow Block Bearing -, 25 mm ID
- SKF SY 40 WF Plummer Block House -, 40 mm ID
- SKF SY 50 WF Plummer Block House -, 50 mm ID
- SKF SY 30 WF Plummer Block House -, 30 mm ID
- SKF SY 45 WF Plummer Block House -, 45 mm ID
- SKF SY 35 WF Plummer Block House -, 35 mm ID